Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message

How to reinstall my W520 to factory default after format C ?

Performance, hardware, software, general buying and gaming discussion..
Post Reply
Message
Author
Yosekan
Posts: 2
Joined: Thu Aug 25, 2011 6:21 am
Location: Zurich, Switzerland

How to reinstall my W520 to factory default after format C ?

#1 Post by Yosekan » Thu Aug 25, 2011 6:36 am

Here is my problem :

1. I boot for the first time my ThinkPad W520 and install Windows Seven
2. I see that there is only 1 partition, and use a partition manager to split C:/
3. It doesn't work and my C partition is corrupted
4. I quick format C:/
5. I split it in two partition C and D.

So now, I have the partition with SYSTEM_DRV, my empty C:/, the new empty D:/, and a partition with the Recovery Data on it.

And now, is there a way for me to reinstall my computer using factory defaults ?
Knowing that the Recovery agent at the boot doesn't work and that I have no recovery or installation CD whatsoever.

A little bit of help would most welcome.

Thanks !

ausmike
Senior Member
Senior Member
Posts: 977
Joined: Tue Oct 27, 2009 11:16 am
Location: ~ 3Million Mile Club Member~~

Re: How to reinstall my W520 to factory default after format C ?

#2 Post by ausmike » Thu Aug 25, 2011 6:57 am

hi there
Not sure which country your based @
but CALL Lenovo tech Support, and ask them to send you a RECOVERY DVD
they wll, free of charge ( as your laptop should be - still under warranty)

Also- When you use PM or other partition tools in Win OS (AFAIK....they messup BOOT_SECTOR & other HD stuff) ,,,, the data generaly is still there .... if you have LINUX LIVE CD , boot using that and that will show you the Lenovo FACTORY RESERVE PARTITION, - from which you "CAN DO" reinstall. BUT!!-- but when/IF you reinstall from recovery partition - it will wipe out the WHOLE HARD DRIVE , and you have will to re-create what you wanted to do ( thus you might get the same issue again)

I would recommend - get a 2nd HARD DRIVE ADAPTOR and install your 'other' needs there. W520 will even boot from that 2nd drive!!

Cheers - hope this is helpfull
Work: None - Retired ! Yipee!! ~~Older/Hm use:Asus Zenbook i7FHD~~ w701ds CTO;W520cto;T61P-IPSmodels; T43P,...&700Tstill going strong!! DEC Alpha Series OS: Win7x64; OSX; SuSe Linux; RedHat~~

Colonel O'Neill
ThinkPadder
ThinkPadder
Posts: 1375
Joined: Tue Oct 27, 2009 8:03 am
Location: Vancouver

Re: How to reinstall my W520 to factory default after format C ?

#3 Post by Colonel O'Neill » Thu Aug 25, 2011 7:00 am

Did you order your computer without Windows? If not, then you should've made recovery disks before formatting. If you didn't, then you'll have to pay Lenovo for a set.
W530, W520, X61T, X200s, W550s, E590, T430

Yosekan
Posts: 2
Joined: Thu Aug 25, 2011 6:21 am
Location: Zurich, Switzerland

Re: How to reinstall my W520 to factory default after format C ?

#4 Post by Yosekan » Thu Aug 25, 2011 7:31 am

OK. I will simply call them, so.
Thank you guys for your answer.
And by the way, I ordered the computer with Seven.

Thx again.

Yosekan

bill bolton
Admin Emeritus
Admin Emeritus
Posts: 3848
Joined: Thu Sep 01, 2005 10:09 am
Location: Sydney, Australia - Best Address on Earth!

Re: How to reinstall my W520 to factory default after format C ?

#5 Post by bill bolton » Thu Aug 25, 2011 6:45 pm

ausmike wrote:they wll, free of charge ( as your laptop should be - still under warranty)
Not free of charge in many countries... warranty has nothing to do with it.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Thinkpad - General HARDWARE/SOFTWARE questions”

Who is online

Users browsing this forum: No registered users and 24 guests