thinkpads.com Support Community Forum Index Bill Morrow's thinkpads.com Open Forum - The Original Thinkpad Support Forum
Follow ThinkpadsForum on Twitter
 Support this forum, shop at newmodeus.com
 Support the forum, shop at newmodeus.com
System backups occur about 7:00 am EDT and last about 10 minutes. This will slow performance. RSS feeds have been added to the forum.
Donate if you wish to:
bill at thinkpads dot com

It is currently Wed Aug 27, 2014 10:06 pm

All times are UTC - 5 hours




Post new topic Reply to topic  [ 86 posts ]  Go to page 1, 2, 3  Next
Author Message
PostPosted: Wed Mar 15, 2006 12:08 pm 
Offline
Moderator Emeritus
Moderator Emeritus

Joined: Thu Sep 01, 2005 1:17 pm
Posts: 5441
Location: Wisconsin
I just replaced a T23 system board that had died. On the old board, when powered on, only power LED and the battery LED would turn on.

As I removed the systemboard from the base, I saw that there was a little black capacitor that was just sitting there loose. :shock: :shock:

Here are are pics of the board and where the piece is supposed to go:

http://i27.photobucket.com/albums/c186/ ... 3mobo1.jpg
http://i27.photobucket.com/albums/c186/ ... 3mobo2.jpg
Do any of you think that it might be possible to solder this piece back on and have a fully operational T23 systemboard? It is quite clear where this piece belongs on the board.

Do any of you know what this part is for? I am not much of a schematic person to even try looking it up.

EDIT: Be sure to read all the way through this thread, as there were additional symptoms added to the list by other users.

_________________
"Say hallo to ma lil' friend"...Rules of the Road

The pizza guy vs. the cheapskate


Last edited by tfflivemb2 on Wed Jul 11, 2007 10:44 am, edited 4 times in total.

Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 15, 2006 3:10 pm 
Offline

Joined: Sun Feb 05, 2006 9:17 am
Posts: 12
Location: EU
Hi,

the black piece you call an capacitor is a reel and it might be possible that the failure of the board is caused by that. Just resolder it an try it.

moerph


Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 15, 2006 3:47 pm 
Offline
Junior Member
Junior Member

Joined: Fri Nov 11, 2005 11:33 am
Posts: 493
Location: Chicago, IL
Yeah, you should try it! And let us know how it turns out!

_________________

IBM TP T41p (1.7G/1GB/100GB-7k100/DVD-CDRW/SXGA+/BT)
IBM TP T22 (900/512/40/DVD/CDRW/14")
IBM TP A31 (1.8GHz/512MB/40GB/DVD-CDRW/15" SXGA)
For sale: n/a
WTB: n/a


Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 15, 2006 3:51 pm 
Offline
Moderator Emeritus
Moderator Emeritus

Joined: Thu Sep 01, 2005 1:17 pm
Posts: 5441
Location: Wisconsin
As soon as I find my soldering gun (I think my wife lent it to someone), I think I will try it. It be nice to have a spare T23 board, since I just paid $96 for a replacement.

I think that it popped off as a result of flexing the board. The person that bought this T23 from me was picking it up one handed. :roll:

Now that I have his fixed, I will get mine back. :D

If it works, I might be in the neighborhood for a dead T23. :wink:

_________________
"Say hallo to ma lil' friend"...Rules of the Road

The pizza guy vs. the cheapskate


Top
 Profile  
 
 Post subject:
PostPosted: Thu Mar 16, 2006 4:11 pm 
Offline
Junior Member
Junior Member

Joined: Sun Jan 15, 2006 12:37 pm
Posts: 311
Location: Hannover, Germany
tfflivemb2 wrote:
As soon as I find my soldering gun

For the love of %/$(%$ don't use a soldering gun for this! It is SMD (surface mounted thingy). Use a thin thin tip soldering iron, magnifying glass, and don't touch the board too long for overheating will damage it.
Best is to try on a spare junk board a few times. :)


Top
 Profile  
 
 Post subject:
PostPosted: Thu Mar 16, 2006 9:48 pm 
Offline
Moderator Emeritus
Moderator Emeritus

Joined: Thu Sep 01, 2005 1:17 pm
Posts: 5441
Location: Wisconsin
Sorry, I used the term "gun" loosely. I have a fine tip soldering iron that I have used for work on motherboards in the past. Most recently to remount the power adapter to the motherboard of an old Toshiba laptop.

_________________
"Say hallo to ma lil' friend"...Rules of the Road

The pizza guy vs. the cheapskate


Top
 Profile  
 
 Post subject:
PostPosted: Fri Mar 17, 2006 1:54 pm 
Offline
Junior Member
Junior Member

Joined: Sat Dec 11, 2004 10:14 pm
Posts: 254
Location: Chicago
I have a "dead" T23 I might part with. I don't have the time to play with it, but the reason I have not sold it yet is because it is in MINT physical shape. I don't know what it is worth for the same reason.

The issue with it is it will boot up most of the time. On occasion it will not boot and gray bars show up on the screen and the cpu fan pulses. Let me know if you are interested.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Mar 17, 2006 1:55 pm 
Offline
Moderator Emeritus
Moderator Emeritus

Joined: Thu Sep 01, 2005 1:17 pm
Posts: 5441
Location: Wisconsin
PM Sent.

_________________
"Say hallo to ma lil' friend"...Rules of the Road

The pizza guy vs. the cheapskate


Top
 Profile  
 
 Post subject:
PostPosted: Tue Apr 18, 2006 9:08 am 
Offline

Joined: Mon Apr 17, 2006 8:07 am
Posts: 13
Location: Belgrade
I just joined up to say thank you to you people. This occured with my Second hand T23 and I was really worried that it was for the bin (or at least an expensive motherboard repair).

Thanks to the posts here (especially tfflivemb2) I took my T23 apart, and successfully soldered the component back on. I even wrote about how I did it on my website. Either way the laptop has been working perfectly for a few days, and I just am overjoyed at this.

Hence why I am writing this post. Indeed once soldered there seems to be no further damage, and the laptop is working like new :)

Once again, thank you!

I am also amazed the flexibility and modular construction of the thinkpads, I really am impressed how builder-freindly they are, by far the easiest laptops to take apart and repair/upgrade. I'm pretty much a thinkpad convert now :D


Top
 Profile  
 
 Post subject:
PostPosted: Tue Apr 18, 2006 9:27 am 
Offline
Moderator Emeritus
Moderator Emeritus

Joined: Thu Sep 01, 2005 1:17 pm
Posts: 5441
Location: Wisconsin
I am VERY glad to hear that it worked for you. This gives me hope.

I am trying to pick up a T23 with a dead systemboard, so that i can test this theory.

You just gave me a lot of confidence to try this. Thanks!!

P.S. Welcome to the forum!!! :)

_________________
"Say hallo to ma lil' friend"...Rules of the Road

The pizza guy vs. the cheapskate


Top
 Profile  
 
 Post subject:
PostPosted: Tue Apr 18, 2006 11:04 am 
Offline

Joined: Mon Apr 17, 2006 8:07 am
Posts: 13
Location: Belgrade
tfflivemb2 wrote:
I am VERY glad to hear that it worked for you. This gives me hope.

I am trying to pick up a T23 with a dead systemboard, so that i can test this theory.

You just gave me a lot of confidence to try this. Thanks!!

P.S. Welcome to the forum!!! :)


thankyou! :)

If you like, you can have a look at this page where I wrote about my attempt. Might be something of interest there.


Last edited by UnixNut on Sun Dec 27, 2009 9:16 am, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Tue Apr 18, 2006 5:03 pm 
Offline
Moderator Emeritus
Moderator Emeritus

Joined: Thu Sep 01, 2005 1:17 pm
Posts: 5441
Location: Wisconsin
Wow!! It was exactly the same part!!

Even more reason to get that base, as soon as I can. Not to mention that I need to find my soldering iron. I think my wife lent it to someone. If this is really going to work, then I might just buy another one.

_________________
"Say hallo to ma lil' friend"...Rules of the Road

The pizza guy vs. the cheapskate


Top
 Profile  
 
 Post subject:
PostPosted: Tue Apr 18, 2006 6:17 pm 
Offline

Joined: Sat Feb 11, 2006 5:14 am
Posts: 49
Fyi, the broken off component L11 is an inductor (two connections means a choke).

In this and other forums I've heard a lot about broken and loose solder connections, particularly surface mounted components, is no testamony to the relative stiffness of the plastic tray under the systemboard. Closing the display before transporting the Thinkpad is best insurance against flexing the systemboard.

Just my 2 cents worth ¥.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Apr 18, 2006 9:18 pm 
Offline
Moderator Emeritus
Moderator Emeritus

Joined: Thu Sep 01, 2005 1:17 pm
Posts: 5441
Location: Wisconsin
Just curious, where did you get the information as to the part number? Is there a schematic for it? Someone was recently asking me for one.

_________________
"Say hallo to ma lil' friend"...Rules of the Road

The pizza guy vs. the cheapskate


Top
 Profile  
 
 Post subject:
PostPosted: Wed Apr 19, 2006 9:51 am 
Offline
Junior Member
Junior Member

Joined: Sat Dec 11, 2004 10:14 pm
Posts: 254
Location: Chicago
L11 is the reference designator on the PCB. I don't know where you would get a schematic (other than IBM) but I would like one too!

UnixNut: excellent writeup on your repair of the inductor. I will have to take my T23 apart and see if that is the culprit for my issues.


Top
 Profile  
 
 Post subject: its alive!
PostPosted: Sat Apr 22, 2006 3:52 pm 
Offline
Junior Member
Junior Member

Joined: Mon Apr 03, 2006 10:30 am
Posts: 253
Location: Great White North
got my T23 working, thought I would read the notes once again about the loose inductor. I took the T23 apart, looked at the inductors, gently pressed them to see if anything seemed loose, and voila, one fell off. I resoldered and it worked. its alive!

thx for the wiki post! it helped.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Apr 22, 2006 3:57 pm 
Offline
Moderator Emeritus
Moderator Emeritus

Joined: Thu Sep 01, 2005 1:17 pm
Posts: 5441
Location: Wisconsin
Great, looks like we have a trend here.

If I can just find a decent priced dead T23, I'd be ok.

_________________
"Say hallo to ma lil' friend"...Rules of the Road

The pizza guy vs. the cheapskate


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 06, 2006 4:45 pm 
Offline

Joined: Fri Apr 28, 2006 8:11 pm
Posts: 2
Location: USA
I just thought it might be a good idea if I posted here. I just repaired two T23 machines with almost identical problems, however it was the other identical component instead of the one that was pointed out in the picture and blog documentation. They both work 100% now; though I've not had them on for more than 24 hours. (I think it had to do with the way these particular machines were picked up, near the Hard Drive)

I think we do have a trend here; and further investigation should be done to see if we can maybe put some non-conductive material under it to help prevent this from happening.


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 13, 2006 11:26 pm 
Offline
Sophomore Member

Joined: Mon Apr 17, 2006 11:36 pm
Posts: 188
Location: Mesa (near Phoenix) Arizona
After reading this thread, I decided to dig up one of my broken T23 bases, and see what I could see.

Tore it apart, and there is a coil that is half broken off. I just saw this 5 minutes ago, so, maybe I have a T23 or 2, that can be fixed!

(Inductors, chokes and coils are all basically the same things. A coil of wire around a ferrite core.)

Tomorrow, after I get some home jobs done, I'll be firing up my soldering iron!

THANKS, Guys!

steve


Top
 Profile  
 
 Post subject:
PostPosted: Sun May 14, 2006 1:39 pm 
Offline
Sophomore Member

Joined: Mon Apr 17, 2006 11:36 pm
Posts: 188
Location: Mesa (near Phoenix) Arizona
I just tore my last T23 apart, and there it was. The coil was sitting on the bottom tray, completely off of the mobo.

Time to do some soldering.

steve


Top
 Profile  
 
 Post subject:
PostPosted: Sun May 14, 2006 2:05 pm 
Offline
Moderator Emeritus
Moderator Emeritus

Joined: Thu Sep 01, 2005 1:17 pm
Posts: 5441
Location: Wisconsin
I just bought two dead T23s hoping that the problem is the same. I have a new soldering iron, but am waiting on one of the Dead T23s to come, so that I have something "complete" to test it on.

I do have a dead T23 here, but without the LCD...hmm, I'll just hold off a little longer.

_________________
"Say hallo to ma lil' friend"...Rules of the Road

The pizza guy vs. the cheapskate


Last edited by tfflivemb2 on Wed May 17, 2006 8:45 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Wed May 17, 2006 8:33 pm 
Offline
Sophomore Member

Joined: Mon Apr 17, 2006 11:36 pm
Posts: 188
Location: Mesa (near Phoenix) Arizona
Well, I soldered the coil on, on one of my T23s, and put it back together, without a monitor or memory.

I got the 1-3-3-1 beep code, with the memory missing. After I put a stick of memory in and rebooted, I got a 2 beep message, the one that says the clock is incorrect.

Let's see what #2 does.

Oh, I found a third broken T23, so...:D

steve


Top
 Profile  
 
 Post subject:
PostPosted: Wed May 17, 2006 9:03 pm 
Offline
Sophomore Member

Joined: Mon Apr 17, 2006 11:36 pm
Posts: 188
Location: Mesa (near Phoenix) Arizona
Pulled #3 apart, and there was a coil, sitting on the lower tray.

I guess we need to start buying T23s that won't post, so we can do a bit of soldering, and make some $. :D

THANKS Guys!

steve


Top
 Profile  
 
 Post subject:
PostPosted: Wed May 17, 2006 9:28 pm 
Offline
Moderator Emeritus
Moderator Emeritus

Joined: Thu Sep 01, 2005 1:17 pm
Posts: 5441
Location: Wisconsin
That is exactly why I just picked a few myself.

Although, I just got really lucky. I picked up a complete T23 (256mb ram, DVD drive, battery with 34 cycles) that supposedly had a dead system board, for $125. I was thinking that it might be the same problem. I purchased a spare system board for $87, just in case. Well, when I booted it up, it turned out that it only needed a CMOS battery. The only bad part is that it turns out that the LCD bezel and cover are cracked. I can't complain though.

EDIT: As I was typing this, I noticed that the replacement systemboard that I bought is completely missing the second PCB!!! Grrrr. Time to email that seller.

_________________
"Say hallo to ma lil' friend"...Rules of the Road

The pizza guy vs. the cheapskate


Top
 Profile  
 
 Post subject:
PostPosted: Wed May 17, 2006 9:38 pm 
Offline
Sophomore Member

Joined: Mon Apr 17, 2006 11:36 pm
Posts: 188
Location: Mesa (near Phoenix) Arizona
Guys, maybe we should delete this thread, or move it to a private section, for only Members to look at. :D

If this secret gets out, non-posting T23s are not going to be cheap on Ebay! :shock: :D

Oh, #3 is up and working.

steve


Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 21, 2007 6:22 pm 
Offline
Moderator Emeritus
Moderator Emeritus

Joined: Thu Sep 01, 2005 1:17 pm
Posts: 5441
Location: Wisconsin
Moved back to the T2x Conference and Stickied, as there have been many T23s that have been repaired with this method...

_________________
"Say hallo to ma lil' friend"...Rules of the Road

The pizza guy vs. the cheapskate


Top
 Profile  
 
 Post subject: T23 inductors
PostPosted: Wed Mar 28, 2007 4:08 pm 
Offline

Joined: Wed Mar 28, 2007 2:21 pm
Posts: 20
Location: Québec, Canada
Hi guys ! 1st time poster, long time reader...

Lots of usefull information and knowleadgeable peoples here :P

Another succesfull T23 inductors repair.

I didn't had any symptom yet , but took the T23 apart anyway to be on the safe side.

Solders seem to look fine , but prying gently those inductors and they pop right off. Soldered them back on so they won't come off again.

Thanks a lot,

Rick

_________________
#1 T500 2241-AT6, T9600@2.8GHZ, 6Gb RAM, 320G HD, WSXGA+ DVD-RW added, webcam added
#2 T23 2647-8mf 1.13Ghz, 1Gb RAM, 80G HD , CD-RW/DVD combo, Win-XP Pro, Wi-Fi added
#3 T23 2647-2U3 1.13Ghz, 768Mb RAM, 40G HD, CD-RW/DVD combo Win-XP Pro


Top
 Profile  
 
 Post subject:
PostPosted: Fri Apr 20, 2007 10:57 am 
Offline
Senior ThinkPadder
Senior ThinkPadder

Joined: Wed Apr 26, 2006 2:13 pm
Posts: 2295
Location: Philadelphia
I just wanted to add my experience on a T23 with the pulsing fan.

Even with the loose inductor, your system may still boot. I found these problems were fixed after re-soldering a loose inductor:

-System sometimes starts but freezes soon after loading Windows.
-Video becomes scrambled/wavy.
-Pressure on the left side of the keyboard allows system to boot until pressure is released.
-Only the standby light blinks when the system is booted.
-HD turns on/off similar to the pulsing fan.

The thread relating to this issue can be found here:
http://forum.thinkpads.com/viewtopic.php?t=41163

Check those inductors for sure!!

_________________
[Current] [Dell Latitude D630] : [Past] [T43] [T40] [T23] [T20] [R40] [X22] [600E] [570] [765D]


Last edited by dsigma6 on Fri Apr 20, 2007 11:37 am, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Fri Apr 20, 2007 11:20 am 
Offline
Junior Member
Junior Member

Joined: Sun Sep 03, 2006 8:14 pm
Posts: 261
Location: Garfield Heights, Ohio
I'd just like to add another symptom. I recently picked up another T23 with the inductor issue and while trying to power it on, I heard a rapid and somewhat faint ticking noise coming from the area of the CPU. After resoldering the inductor, it boots just fine again. So pulsing fan and possibly ticking near the CPU are signs that there's an inductor problem.

_________________
2373 T42
2687 T43


Top
 Profile  
 
 Post subject:
PostPosted: Mon Apr 30, 2007 1:09 am 
Offline
Junior Member
Junior Member

Joined: Tue Mar 13, 2007 8:23 pm
Posts: 262
Location: Bristol, CT
I Think all I have to say is :Nice:

:thumbs-UP:

:bow:

_________________
ThinkPad T23 2648-NU1 WinXP Pro
ThinkDock 2631
Thinkpad 600 2645-45U -No OS Yet-
Thinkpad I Series 2621-560 -No OS Yet-
Jornada 820 WinCE
IntelliStation M Pro 6230-38U WinXP Pro


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 86 posts ]  Go to page 1, 2, 3  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group