Fits perfectly, I used .5mm or so copper sheet for GPU next time will glue this on.
I used fujipoly 1.5mm 6w/mk thermal pad on northbridge. That thermal pad does feels *much* heavier than original northbridge pad of same size. Will order 11w/mk thermal pad again in 1mm and 1.5mm thickness. Can also get fujipoly in thicker dimensions for the southbridge but cost is expensive so that will take time for time being.
GPU temps follows CPU around 5 degrees warmer then fall behind as CPU heats up. The merom CPU when stressed or the heatsink design is poor (3 heatpipes type) is so hot. Remember I mentioned that wanted to try penryn fsb 1066 CPU as 800fsb (no mod to the 15.4" R61 w/ nvidia mainboard) with modified bios.
Cheers, thinkpadcollection.
Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
My results on discrete GPU T61 heatsink into R61.
-
- Senior Member
- Posts: 817
- Joined: Fri Oct 17, 2014 8:13 pm
- Location: kingston, ontario, Canada
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Can you add a GeForce GPU in a G41 with Intel GPU?
by Gonzaleitor » Thu Oct 26, 2023 1:51 pm » in ThinkPad R, A, G and Z Series - 2 Replies
- 5535 Views
-
Last post by Gonzaleitor
Thu Oct 26, 2023 5:22 pm
-
-
-
T520 Discrete Graphics No Longer Work
by halitics » Sat Dec 16, 2023 10:34 am » in ThinkPad T400/T410/T420 and T500/T510/T520 Series - 6 Replies
- 1781 Views
-
Last post by kfzhu1229
Sun Dec 17, 2023 12:52 pm
-
-
- 2 Replies
- 1647 Views
-
Last post by Jeannot
Sat Dec 23, 2023 4:46 am
-
-
What to do with R61 machines?
by solidpro » Wed Feb 28, 2024 5:09 am » in ThinkPad R, A, G and Z Series - 11 Replies
- 843 Views
-
Last post by mikemex
Fri Mar 01, 2024 10:18 pm
-
Who is online
Users browsing this forum: No registered users and 21 guests