Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
Help! Issue with X60T's base covers *PICS*
-
- Moderator
- Posts: 2156
- Joined: Mon Aug 17, 2009 8:38 am
- Location: Zurich, Switzerland
Help! Issue with X60T's base covers *PICS*
Hi All
Today I was doing a mobo swap from one X60T lower assembly I got here in the forum to another X60T. I had a small surprise when trying to install the pen assembly (I don't know if this is the official name) for the digitizer. The basecovers were slightly different
The donor lower case looks like this (FRU 42W2547):
... and when trying to install this pen assembly:
... I then realize that the receiving base cover looks like this:
So there's no way to install the pen assembly due to the extra notch on the left of the cover. Note that there are three notches on the first picture but four on the third. Now the digitizer will get inside the tablet, but it's tricky to get it out. Is there any reason why Lenovo has two different bases? Or maybe my X60T has a non original basecover? Or there is a different FRU for the pen assembly...?
Unfortunately when I realized this issue I wasn't willing to remove all the components again to check the FRU number of my X60T
Any help would be appreciated! Thanks a lot in advance!!
Edit: Updated the pictures to mark the problematic areas, check for the stars
Today I was doing a mobo swap from one X60T lower assembly I got here in the forum to another X60T. I had a small surprise when trying to install the pen assembly (I don't know if this is the official name) for the digitizer. The basecovers were slightly different
The donor lower case looks like this (FRU 42W2547):
... and when trying to install this pen assembly:
... I then realize that the receiving base cover looks like this:
So there's no way to install the pen assembly due to the extra notch on the left of the cover. Note that there are three notches on the first picture but four on the third. Now the digitizer will get inside the tablet, but it's tricky to get it out. Is there any reason why Lenovo has two different bases? Or maybe my X60T has a non original basecover? Or there is a different FRU for the pen assembly...?
Unfortunately when I realized this issue I wasn't willing to remove all the components again to check the FRU number of my X60T
Any help would be appreciated! Thanks a lot in advance!!
Edit: Updated the pictures to mark the problematic areas, check for the stars
Last edited by Tasurinchi on Sun Apr 01, 2012 9:22 am, edited 2 times in total.
IBM Convertible 5140/L40SX/220/240/240X/2*340CSE/360PE/365XD/380D/380E/380XD/380Z/390/560E/560X/2*570/2*600/600E/750Cs/755C/760CD/760EL/760XD/770E
A20p/A22p/A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T40x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/12*X2xx/4*X30x/Z60m/3*Z61x
A20p/A22p/A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T40x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/12*X2xx/4*X30x/Z60m/3*Z61x
Re: Help! Issue with X60T's base covers *PICS*
Could you elaborate a little more how it's unable to fit, I can see there seems to be a minor difference but don't really realize what's exactly preventing the spring part to hold and eject the stylus from fitting.
Perhaps you can indicate in the photos...?
Cheers.
Perhaps you can indicate in the photos...?
Cheers.
-
- Freshman Member
- Posts: 59
- Joined: Thu Jul 28, 2011 1:38 pm
- Location: London UK
Re: Help! Issue with X60T's base covers *PICS*
Yep there are 2 base FRUs...
I ran into this and ended up cutting the small notch of the spring section - not perfect but it works fine
I ran into this and ended up cutting the small notch of the spring section - not perfect but it works fine
Current Thinkpads - X200s, X61 Tablet (MT+MV), X60 Tablet
Thinkpads Past - T20, T21, T23, X21, X30, T60, X31, X60
Thinkpads Past - T20, T21, T23, X21, X30, T60, X31, X60
-
- Moderator
- Posts: 2156
- Joined: Mon Aug 17, 2009 8:38 am
- Location: Zurich, Switzerland
Re: Help! Issue with X60T's base covers *PICS*
Of course! In the heat of writing the post I forgot to go more in detail with the differences, sorry for that and thanks for pointing this out. Please note that there are three notches on the first picture but four on the third. That four notch is where the small latch of the pen assembly should sit.loyukfai wrote:Could you elaborate a little more how it's unable to fit
I've edited my original post and will try to highlight the problematic areas in the pictures.
IBM Convertible 5140/L40SX/220/240/240X/2*340CSE/360PE/365XD/380D/380E/380XD/380Z/390/560E/560X/2*570/2*600/600E/750Cs/755C/760CD/760EL/760XD/770E
A20p/A22p/A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T40x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/12*X2xx/4*X30x/Z60m/3*Z61x
A20p/A22p/A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T40x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/12*X2xx/4*X30x/Z60m/3*Z61x
-
- Senior Member
- Posts: 852
- Joined: Sun Feb 26, 2012 2:25 am
- Location: Princeton, New Jersey
- Contact:
Re: Help! Issue with X60T's base covers *PICS*
If it were me, I would cut the notch from the pen latch assembly, and use a drop of hot glue to keep it in place.
X60 tablet 6363-P3U, 3GB ram, 128GB SanDisk Extreme SSD, SXGA+ screen, Intel 6300
T61 Frankenpad in 15 inch T60 body, UXGA LED-lit AFFS LCD, T9300, 6GB RAM, NVidia NVS140m, Intel 6205, 128GB Crucial M4 SSD, 1TB HGST HDD + eBay caddy in Ultrabay
701c butterfly, 75MHz 486DX4, 40MB ram, 1GB CF card
T61 Frankenpad in 15 inch T60 body, UXGA LED-lit AFFS LCD, T9300, 6GB RAM, NVidia NVS140m, Intel 6205, 128GB Crucial M4 SSD, 1TB HGST HDD + eBay caddy in Ultrabay
701c butterfly, 75MHz 486DX4, 40MB ram, 1GB CF card
-
- Moderator
- Posts: 2156
- Joined: Mon Aug 17, 2009 8:38 am
- Location: Zurich, Switzerland
Re: Help! Issue with X60T's base covers *PICS*
grunger106 wrote:I ran into this and ended up cutting the small notch of the spring section - not perfect but it works fine
Well, this would be surely a feasible solution. Now the question is what had IBM/Lenovo in mind when they designed two different base coverstwistero wrote: If it were me, I would cut the notch from the pen latch assembly, and use a drop of hot glue to keep it in place
My guess is that there should be two different pen assembly parts as well. But after checking the HMM and I can't find any information about it...
IBM Convertible 5140/L40SX/220/240/240X/2*340CSE/360PE/365XD/380D/380E/380XD/380Z/390/560E/560X/2*570/2*600/600E/750Cs/755C/760CD/760EL/760XD/770E
A20p/A22p/A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T40x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/12*X2xx/4*X30x/Z60m/3*Z61x
A20p/A22p/A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T40x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/12*X2xx/4*X30x/Z60m/3*Z61x
-
- Freshman Member
- Posts: 59
- Joined: Thu Jul 28, 2011 1:38 pm
- Location: London UK
Re: Help! Issue with X60T's base covers *PICS*
I had a long conversation with Lenovo about 6 months ago about this and the pen spring part is not a FRU, it's part of the base FRU and not available on its own.
I have this from the head of Lenovo's EMAA sales dept, who I eventually emailed as a shot in the dark as no-one could work out which part I wanted.
It IS a FRU on the X2xx series, but not on the X6x series
I have this from the head of Lenovo's EMAA sales dept, who I eventually emailed as a shot in the dark as no-one could work out which part I wanted.
It IS a FRU on the X2xx series, but not on the X6x series
Current Thinkpads - X200s, X61 Tablet (MT+MV), X60 Tablet
Thinkpads Past - T20, T21, T23, X21, X30, T60, X31, X60
Thinkpads Past - T20, T21, T23, X21, X30, T60, X31, X60
-
- Moderator
- Posts: 2156
- Joined: Mon Aug 17, 2009 8:38 am
- Location: Zurich, Switzerland
Re: Help! Issue with X60T's base covers *PICS*
That was my thought when checking the HMM, seems that I found one candidate en Ebay, unfortunately the shipping costs are twice the price of the assembly itself (Doh!) Pen Stylus
IBM Convertible 5140/L40SX/220/240/240X/2*340CSE/360PE/365XD/380D/380E/380XD/380Z/390/560E/560X/2*570/2*600/600E/750Cs/755C/760CD/760EL/760XD/770E
A20p/A22p/A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T40x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/12*X2xx/4*X30x/Z60m/3*Z61x
A20p/A22p/A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T40x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/12*X2xx/4*X30x/Z60m/3*Z61x
-
- Similar Topics
- Replies
- Views
- Last post
-
-
L40sx and PS/2e M4-1 Space Saver keyboards [Warning: pics]
by ThinkDan » Wed Nov 08, 2023 7:14 pm » in ThinkPad Legacy Hardware - 0 Replies
- 2395 Views
-
Last post by ThinkDan
Wed Nov 08, 2023 7:14 pm
-
-
-
Can anyone look at my pics and confirm if t480 lid is magnesium?
by redglow » Mon Dec 04, 2023 4:30 pm » in ThinkPad T430-T490 / T530-T590 Series - 4 Replies
- 2474 Views
-
Last post by mikemex
Sat Mar 02, 2024 2:57 am
-
-
-
WorkPad Z50 strip down and clean up [WARNING: PICS]
by ThinkDan » Fri Feb 02, 2024 5:56 pm » in ThinkPad Legacy Hardware - 3 Replies
- 849 Views
-
Last post by ThinkDan
Sun Mar 10, 2024 6:54 pm
-
-
-
PC110 Restoration stuff [HUGE PICS]
by solidpro » Wed Mar 06, 2024 1:10 pm » in ThinkPad Legacy Hardware - 2 Replies
- 347 Views
-
Last post by solidpro
Sun Mar 10, 2024 5:35 am
-
Who is online
Users browsing this forum: No registered users and 34 guests