Page 1 of 1
stylus to finger conversion
Posted: Fri Nov 20, 2009 2:41 pm
by JALinker
I have an x60t, (6364-38u) with the 1024x768 screen. It is stylus-only touch, and I would like to convert it to finger touch... what would be involved in that conversion?
Thank you!
Re: stylus to finger conversion
Posted: Fri Jun 01, 2012 9:11 pm
by JALinker
Seriously? 3 years, no response?
I have found a lot out there, but not a definitive way to do the swap...
Anyone willing to help?
Thanks!
Re: stylus to finger conversion
Posted: Fri Jun 01, 2012 9:49 pm
by twistero
You need to swap the entire LCD panel + digitizer for a finger-touch enabled one.
Re: stylus to finger conversion
Posted: Sun Jun 03, 2012 12:02 am
by JALinker
The entire lid display assembly? Or just the guts? Are there part numbers for what I need?
Thank you!
Re: stylus to finger conversion
Posted: Sun Jun 03, 2012 4:59 am
by twistero
JALinker wrote:The entire lid display assembly? Or just the guts? Are there part numbers for what I need?
Thank you!
Check the Hardware Maintenance Manual.
http://support.lenovo.com/en_US/detail. ... D=NDEX-HMM