Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message

[HOWTO] osx86 on a T60P 2623DDU OR X60S

OS-X on ThinkPads
Message
Author
MaloventEvil
Sophomore Member
Posts: 140
Joined: Fri Apr 01, 2005 1:32 am
Location: Santa Cruz, CA

#31 Post by MaloventEvil » Wed Aug 09, 2006 8:11 pm

so after doing this, what benefits will i see? i am unable to get resolution switching...

gastro54
Posts: 33
Joined: Mon May 29, 2006 6:04 pm
Location: Chapel Hill

#32 Post by gastro54 » Thu Aug 10, 2006 12:11 am

This is the link to the X1600 discussion http://forum.insanelymac.com/index.php?showtopic=19806

And yes the ATINDRV is the right file to modify
HackBook Pro: T60p 2623DDU / 2.0Ghz Core Duo / 1gb / 100gb 7200rpm / FireGL V5200 256mb / 15" FlexView IPS / Atheros AR5BXB6 / JaS 10.4.6 -> 10.4.7 / XBench: 92.50

MaloventEvil
Sophomore Member
Posts: 140
Joined: Fri Apr 01, 2005 1:32 am
Location: Santa Cruz, CA

#33 Post by MaloventEvil » Thu Aug 10, 2006 1:26 am

I already had tried that method and it caused the screen to show up black with weird lines during boot. did you guys get hardware mouse and resolution switching working? If so, enlighten me please!

MaloventEvil
Sophomore Member
Posts: 140
Joined: Fri Apr 01, 2005 1:32 am
Location: Santa Cruz, CA

#34 Post by MaloventEvil » Thu Aug 10, 2006 2:02 am

random, are you 100% sure that <string>LCD</string> is valid? I still get tearing; it doesn't appear that the non-VESA framebuffer is loading... do you get tearing?

wareynolds
Posts: 38
Joined: Mon Jun 19, 2006 9:32 am
Location: USA

#35 Post by wareynolds » Thu Aug 10, 2006 8:22 am

I am still curious as well what changing the card typr to C4 does. Just changing the graphics mode gets me the higher resolution.

I made the changes as stated in the bottom of page two, still get a black screen. I have played with this so much I will probably reload. Downloaded 10.4.6 JaS disc, so we will see if it makes any change.

EDIT: Same thing, still boots with black screen and some random color alonf the top.

When booting into safe mode it gave me 1600x1200, but do display changing options.

randomocity
Posts: 26
Joined: Thu Jul 06, 2006 8:58 pm
Location: Philadelphia, PA

#36 Post by randomocity » Thu Aug 10, 2006 9:31 am

MalevolentEvil: To answer your question, yes I get tearing, but at least it works. So far this is the only way I've been able to get QE support that works, although i do get occasional tearing. Also, noone gets resolution switching. As far as i know, noone has been able to get resolution switching on any card other than an actual mac. <string>LCD</string> is what i used, so i guess it was the right one. For me it was mostly trial and error untill i got the QE/CI working and not get the black screen.

Wareynolds: 0x71c41002 is the device and vendor ID for the v5200. By changing this number in the kext, your machine will be able to pick up the card.

EDIT: I'm using the 1.4.26.11 (3493) ATIRadeonX1000 kext. Maybe its a different driver than you're using Wareynolds.
Thinkpad T60p (2623 DDU)
T2500 (2Ghz), 2Gb Ram, 100Gb 7200rpm HDD, FireGL V5200, IBM a/b/g, Bluetooth, Fingerprint

MaloventEvil
Sophomore Member
Posts: 140
Joined: Fri Apr 01, 2005 1:32 am
Location: Santa Cruz, CA

#37 Post by MaloventEvil » Thu Aug 10, 2006 5:45 pm

interesting... didn't even need to do any modification to ATINDRV to get QE/CI support....

Many people ave gotten resolution switching & hardware mouse.

MaloventEvil
Sophomore Member
Posts: 140
Joined: Fri Apr 01, 2005 1:32 am
Location: Santa Cruz, CA

#38 Post by MaloventEvil » Thu Aug 10, 2006 5:46 pm

wareynolds wrote:I am still curious as well what changing the card typr to C4 does. Just changing the graphics mode gets me the higher resolution.

I made the changes as stated in the bottom of page two, still get a black screen. I have played with this so much I will probably reload. Downloaded 10.4.6 JaS disc, so we will see if it makes any change.

EDIT: Same thing, still boots with black screen and some random color alonf the top.

When booting into safe mode it gave me 1600x1200, but do display changing options.
when you did what I said in my original post, it didn't work for you?

norfolkpaul
Posts: 10
Joined: Sat Jul 08, 2006 2:32 pm
Location: United Kingdom

#39 Post by norfolkpaul » Fri Aug 11, 2006 5:43 pm

Has anyone got sleep working yet?

P

wareynolds
Posts: 38
Joined: Mon Jun 19, 2006 9:32 am
Location: USA

#40 Post by wareynolds » Fri Aug 11, 2006 9:22 pm

MaloventEvil wrote:
wareynolds wrote:I am still curious as well what changing the card typr to C4 does. Just changing the graphics mode gets me the higher resolution.

I made the changes as stated in the bottom of page two, still get a black screen. I have played with this so much I will probably reload. Downloaded 10.4.6 JaS disc, so we will see if it makes any change.

EDIT: Same thing, still boots with black screen and some random color alonf the top.

When booting into safe mode it gave me 1600x1200, but do display changing options.
when you did what I said in my original post, it didn't work for you?
No, I got black screen with colors at top for both just changing the info.plist file as well as doing all the changes to the ATINDR file.

I can get 1600x1200 resolution, but not with the card type set to the C4. If I set that I get the black screen with some colors along the top.

When I set back to C5, I look at the display under system profiler and it says no kext loaded. Why is it not loading that?

Looking at the version.plist I think I have the following:

Version 1.4.26
Buildversion 5
Sourceversion 42611

So that does not appear to match. How can I get the same kext? MaloventEvil, what version do you have?

Do I need to get back the 9700.kext file and hex edit that as mentioned in one of the threads at osx86project/insanelymac site?

I am also not sure what QE and CI actually will benifit, should I bother?

gastro54
Posts: 33
Joined: Mon May 29, 2006 6:04 pm
Location: Chapel Hill

#41 Post by gastro54 » Sun Aug 13, 2006 1:54 am

I basically did the same thing as randomocity, it booted up fine into 1600x1200, everything looks smooth, but I don't think I am getting QE/CI support - is there any way to tell?

Also, when I put in a DVD, the player starts then shuts down saying "application closed unexpectedly" I am able to play the DVD in VLC, but playback is choppy. Any ideas?
wareynolds wrote: Looking at the version.plist I think I have the following:

Version 1.4.26
Buildversion 5
Sourceversion 42611

So that does not appear to match. How can I get the same kext? MaloventEvil, what version do you have?
Your .kext version is the same as randomocity's
HackBook Pro: T60p 2623DDU / 2.0Ghz Core Duo / 1gb / 100gb 7200rpm / FireGL V5200 256mb / 15" FlexView IPS / Atheros AR5BXB6 / JaS 10.4.6 -> 10.4.7 / XBench: 92.50

wareynolds
Posts: 38
Joined: Mon Jun 19, 2006 9:32 am
Location: USA

#42 Post by wareynolds » Sun Aug 13, 2006 8:51 pm

you can tellby going into system profile under Display and it will list it there.

gastro54
Posts: 33
Joined: Mon May 29, 2006 6:04 pm
Location: Chapel Hill

#43 Post by gastro54 » Sun Aug 13, 2006 9:08 pm

wareynolds wrote:you can tellby going into system profile under Display and it will list it there.
Ah, thanks - yea, neither QE/CI are supported with my current config - going to have to figure that out...

warey, did you end up getting it to work with QE/CI ?
HackBook Pro: T60p 2623DDU / 2.0Ghz Core Duo / 1gb / 100gb 7200rpm / FireGL V5200 256mb / 15" FlexView IPS / Atheros AR5BXB6 / JaS 10.4.6 -> 10.4.7 / XBench: 92.50

wareynolds
Posts: 38
Joined: Mon Jun 19, 2006 9:32 am
Location: USA

#44 Post by wareynolds » Mon Aug 14, 2006 8:50 pm

Gastro, I did not.

I was trying to figure out if there are other files I needed to edit. The link to the X1600/X1800 post refers to modifying the 9700kext file.

randomocity and/or Malovent, were there any other files or something that needed to be edited other than what you state in your post? Maybe there is something that is assumed I know that I do not.

gastro54
Posts: 33
Joined: Mon May 29, 2006 6:04 pm
Location: Chapel Hill

#45 Post by gastro54 » Mon Aug 14, 2006 9:35 pm

wareynolds wrote:Gastro, I did not.

I was trying to figure out if there are other files I needed to edit. The link to the X1600/X1800 post refers to modifying the 9700kext file.
From my reading, I gathered that this was actually a different method of enabling your card.

Graphics Card Guides:
borisbadenov X1600 X1800
koverg X700 and other ATI PCIe Cards
griffsta manual version of koverg
Omni's Callisto says it doesnt work with X1000 series cards
HackBook Pro: T60p 2623DDU / 2.0Ghz Core Duo / 1gb / 100gb 7200rpm / FireGL V5200 256mb / 15" FlexView IPS / Atheros AR5BXB6 / JaS 10.4.6 -> 10.4.7 / XBench: 92.50

randomocity
Posts: 26
Joined: Thu Jul 06, 2006 8:58 pm
Location: Philadelphia, PA

Drivers

#46 Post by randomocity » Tue Aug 15, 2006 9:37 am

At this point wareynolds, I'm debating on posting my drivers up online somewhere. I have to check out the legality of such, so ill check on that and get back to the community. If you've done all the mods that I've listed or that has been listed in the borisbadenov method and you still get nothing, my advice is to play around with the drivers to try and see if it works. For me it was the LCD string that got the QE/CI support working from the blsod (Black screen of death at this point, lol). For others, just editing the one or two files will make it work perfectly.

Frankly im getting sick and tired of this tearing and I'm to the point where I'm ready to write my own drivers for this card, and although ive never actually written mac drivers, i do have experience on linux and bsd with driver development and i figure it would be a good way to break into mac devel.

EDIT: for anyone that cares I just benched 89.87 on Xbench today, so the T60p really matches up well to mac hardware.
Thinkpad T60p (2623 DDU)
T2500 (2Ghz), 2Gb Ram, 100Gb 7200rpm HDD, FireGL V5200, IBM a/b/g, Bluetooth, Fingerprint

wareynolds
Posts: 38
Joined: Mon Jun 19, 2006 9:32 am
Location: USA

#47 Post by wareynolds » Tue Aug 15, 2006 8:52 pm

I will get you a step by step list of what I have done. Or shoudl I say to make sure I followed what you think I should have.

The thing I do not understand is the whole if we have the same machine and use the same install disk, how can we not get the same results.

The Mac reports it as a 71C4. Maybe there are several versions of the JAS 10.4.6 disk.... how can you tell on that?

I just do not know enough about the Mac or all the interaction with Kext files and the like, so I am lost.

I would love a copy of your drivers, feel free to PM me or just contact me at waltr at umich dot edu

If i get the files it would be a good way to tell if it is software or if it is something in the hardware.

Thanks.

BTW, is this the same thread you think I should be refering to on the borisbadenov method?
http://forum.osx86project.org/index.php?showtopic=19806

randomocity
Posts: 26
Joined: Thu Jul 06, 2006 8:58 pm
Location: Philadelphia, PA

Questions

#48 Post by randomocity » Wed Aug 16, 2006 7:53 am

Alright first give me the step by step of what you have done, and i will compare it to mine. If i see any difference between the two methods, i will be glad to point out any problems. I may actually end up reformatting (saving the kexts that i have now to a disk) and trying again from scratch and really doing some detailed documentation. Also, I'm not sure if we are using the same install disk, as I am using the HotISO version, if that makes any difference. Also, make sure on install that you are not installing any of the unneeded files, IE the AMD base/AMD patch drivers/GMA 950 drivers. Keep the mobility ones just in case, though i dont think they are needed. I'll see what i can do about sending the drivers, expect and email shortly.
Thinkpad T60p (2623 DDU)
T2500 (2Ghz), 2Gb Ram, 100Gb 7200rpm HDD, FireGL V5200, IBM a/b/g, Bluetooth, Fingerprint

wareynolds
Posts: 38
Joined: Mon Jun 19, 2006 9:32 am
Location: USA

#49 Post by wareynolds » Wed Aug 16, 2006 9:16 am

Ok, I think MaloventEvil might have said he was using the 10.4.6 Jas ISO.

I am trying to get the 10.4.6 HotISO image, but the current download speeds I am getting, well I might be done some time next week.

Anyway, here is what I did...

1. sudo mkdir /ATIBackup
2. sudo mv /System/Library/Extensions/ATI* /ATIBackup/
3. sudo mv /ATIBackup/ATIRadeonX1000* /System/Library/Extensions/
4. sudo vi /System/Library/Extensions/ATIRadeonX1000.kext/Contents/Info.plist

Changed to the following:

<key>IOPCIMatch</key>
<string>0x71C41002</string>
***This right here is what appears to be the problem for me. The default is 0x71C51002 If I change this file to the C4 I always get the black screen (BlSOD)

5. sudo mv /ATIBackup/ATINDRV.kext/ /System/Library/Extensions
Just forgot to copy this one back from backup.
6. sudo vi /System/Library/Extensions/ATINDRV.kext/Contents/Info.plist

Changed
<key>IOProviderClass</key>
<string>IONDRVDevice</string>
To:
<key>IOProviderClass</key>
<string>IOPCIDevice</string>

Also Changed
<key>IONameMatch</key>
<string>ATY,Wormy</string>
To
<key>IONameMatch</key>
<string>LCD</string>

7. sudo vi /System/Library/Extensions/ATIRadeonX1000GA.plugin/Contents/Info.plist

Made changes to match card (Just pasting my section and not the original)

<dict>
<key>100271C4-0000-0000-0000-000a27898d3e<key>
<string>ATIRadeonX1000GAFactory</string>
</dict>
<key>CFPlugInTypes</key>
<dict>
<key>ACCF0000-0000-0000-0000-000a2789904e<key>
<array>
<string>100271C4-0000-0000-0000-000a27898d3e</string>

8. sudo rm -Rf /System/Library/Extensions.mkext
9. sudo rm -Rf /System/Library/Extensions.kextcache
10. sudo kextload /System/Library/Extensions/ATIRadeonX1000.kext
11. sudo kextcache -k /System/Library/Extension
12. sudo diskutil repairPermissions /


Then I reboot and get the black screen with those colors at the top of the screen.

Do I need to do any additional hex editing in the MacOS file under the ATIRadeonX1000.kext/Contents/ directory?

Here is its info
manzanilla:/System/Library/Extensions/ATIRadeonX1000.kext/Contents/MacOS

-rw-r--r-- 1 root wheel 903812 Mar 8 00:15 ATIRadeonX1000

MD5 (ATIRadeonX1000) = f47253362cc6e60ee7ab8aff7e35947

Here is my Machine info:

Hardware Overview:

Machine Name: jMac
Machine Model: ADP2,1
CPU Type: Genuine Intel® CPU T2500 @
Number Of CPUs: 2
CPU Speed: 2 GHz
L2 Cache (per CPU): 2 MB
CPU Features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT CLFSH DS ACPI MMX FXSR SSE SSE2 SS HTT TM EST
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: 79ET65WW (1.09a) (LENOVO)

And my Display info (with it set to 71C5 in the ATIRadeonX1000.kext Info.plist file *otherwise I get BlSOD) All others files still reference 71C4)

Display:

Type: VGA-Compatible Controller
Bus: PCI
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x71c4
Revision ID: 0x0000
Kernel Extension Info: No Kext Loaded
Displays:
Display:
Resolution: 1600 x 1200
Depth: 32-bit Color
Core Image: Not Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Not Supported

[/code]

wareynolds
Posts: 38
Joined: Mon Jun 19, 2006 9:32 am
Location: USA

#50 Post by wareynolds » Wed Aug 16, 2006 3:16 pm

Well I downloaded the 10.4.6 hotiso

Still get the same thing. I think there must be something hardware related, but I have no idea what

gastro54
Posts: 33
Joined: Mon May 29, 2006 6:04 pm
Location: Chapel Hill

#51 Post by gastro54 » Wed Aug 16, 2006 8:15 pm

Warey, I don't see SSE3 listed under your cpu features - it should be there I think

Here is my info:

Machine Name: jMac
Machine Model: ADP2,1
CPU Type: Genuine Intel® CPU T2500 @
Number Of CPUs: 2
CPU Speed: 2 GHz
L2 Cache (per CPU): 2 MB
CPU Features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT CLFSH DS ACPI MMX FXSR SSE SSE2 SS HTT TM SSE3 MON VMX EST TM2 TPR
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: 79ET61WW (1.06 ) (LENOVO)
HackBook Pro: T60p 2623DDU / 2.0Ghz Core Duo / 1gb / 100gb 7200rpm / FireGL V5200 256mb / 15" FlexView IPS / Atheros AR5BXB6 / JaS 10.4.6 -> 10.4.7 / XBench: 92.50

randomocity
Posts: 26
Joined: Thu Jul 06, 2006 8:58 pm
Location: Philadelphia, PA

#52 Post by randomocity » Wed Aug 16, 2006 8:29 pm

When you boot up, do you get the grey mac loading screen?

EDIT: Either that or what looks like linux loading up with everything loading in the foreground?

EDIT2: I dont know if this makes any difference, but im running bios version 1.09
Thinkpad T60p (2623 DDU)
T2500 (2Ghz), 2Gb Ram, 100Gb 7200rpm HDD, FireGL V5200, IBM a/b/g, Bluetooth, Fingerprint

wareynolds
Posts: 38
Joined: Mon Jun 19, 2006 9:32 am
Location: USA

#53 Post by wareynolds » Wed Aug 16, 2006 10:59 pm

Random: Yes, I get the grey mac loading screen with the apple. After it is done is when I got the BlSOD. So graphical boot does work.

I am also running 1.09 for bios.

I think I have found the problem. Thanks to Gastro and my oops.

It can be one of two things, but have not had time to fully check.

1. BIOS settings. The display was set to analog VGA in the bios.

I do not think that was the problem though.

2. Install options. Since Gastro pointed out SSE3 was not showing I thought maybe I did not select the custom option during install. Well, I went back to check and I did. So I wanted to reinstall to see if it was a fluke.

Normally when I get to options I do not install additional languages, I take out all prionters except for the HP (as that is all I have). I also leave all patches in places except the 4 AMD ones. Lastly, I install X11 (figure I wanted it for screen settings or something)

Well this time I installed SSE3, but took out others like Radeon Mobility and X11, but left other stuff in. Now I get SSE# showing and by just chaning the ATIRadeonX1000.kext info.plist file (change 71C5 to 71C4), well it worked. I show QE and CI as supported.

So now I jst ned to figure out what was causing my problem exactly in the above.

So, still have a questions, what benefits do I get from having them supported? I still do not get ability to change resolution via the system settings. What do they do? What is the benifit to them?

So, can folks let me know what options they selected (or left out) when they did the install?

gastro54
Posts: 33
Joined: Mon May 29, 2006 6:04 pm
Location: Chapel Hill

#54 Post by gastro54 » Thu Aug 17, 2006 1:18 am

wareynolds wrote:Random: Yes, I get the grey mac loading screen with the apple. After it is done is when I got the BlSOD. So graphical boot does work.

I am also running 1.09 for bios.

I think I have found the problem. Thanks to Gastro and my oops.

It can be one of two things, but have not had time to fully check.

1. BIOS settings. The display was set to analog VGA in the bios.

I do not think that was the problem though.

2. Install options. Since Gastro pointed out SSE3 was not showing I thought maybe I did not select the custom option during install. Well, I went back to check and I did. So I wanted to reinstall to see if it was a fluke.

Normally when I get to options I do not install additional languages, I take out all prionters except for the HP (as that is all I have). I also leave all patches in places except the 4 AMD ones. Lastly, I install X11 (figure I wanted it for screen settings or something)

Well this time I installed SSE3, but took out others like Radeon Mobility and X11, but left other stuff in. Now I get SSE# showing and by just chaning the ATIRadeonX1000.kext info.plist file (change 71C5 to 71C4), well it worked. I show QE and CI as supported.

So now I jst ned to figure out what was causing my problem exactly in the above.

So, still have a questions, what benefits do I get from having them supported? I still do not get ability to change resolution via the system settings. What do they do? What is the benifit to them?

So, can folks let me know what options they selected (or left out) when they did the install?
Wow I am going to try this right now! looks like a possible solution

Quartz Extreme and Core Image basically enable opengl acceleration for Quartz (i think) and allow for cool effects like the dashboard ripple
HackBook Pro: T60p 2623DDU / 2.0Ghz Core Duo / 1gb / 100gb 7200rpm / FireGL V5200 256mb / 15" FlexView IPS / Atheros AR5BXB6 / JaS 10.4.6 -> 10.4.7 / XBench: 92.50

gastro54
Posts: 33
Joined: Mon May 29, 2006 6:04 pm
Location: Chapel Hill

#55 Post by gastro54 » Thu Aug 17, 2006 2:00 am

YES THAT WAS IT - major props warey, lol
I can't believe we didn't think of that. Installing those mobility drivers from the optional updates made the .kexts incompatible with the mod! The mod only works with the original, unupdated graphics drivers!!

finally

Was able to get my xbench up to 92.50 after fixing this
HackBook Pro: T60p 2623DDU / 2.0Ghz Core Duo / 1gb / 100gb 7200rpm / FireGL V5200 256mb / 15" FlexView IPS / Atheros AR5BXB6 / JaS 10.4.6 -> 10.4.7 / XBench: 92.50

randomocity
Posts: 26
Joined: Thu Jul 06, 2006 8:58 pm
Location: Philadelphia, PA

#56 Post by randomocity » Thu Aug 17, 2006 8:03 am

I figured it was that wayre, hence why i asked whether the boot screen was grey, instead of the black linux like bootscreen that you would get if the AMD base and packages are installed. I mentioned this in an earlier post, though from what it sounded like, it was ignored at first untill the SSE problem came up. Great job wayre, and I hope you enjoy your fully working ThinkMac. One more thing, try running a program in Full Screen OpenGL, does your mouse pointer go away once you go back to the desktop? I'm still having tearing issues and i was wondering if that was a problem for others as well.

EDIT: It had nothing to do with the mobility drivers btw, and everything to do with the AMD packages. I did install the Mobility drivers and i never got the problem, though i didnt install the AMD packages and the other misc files. And i think i deserve a bit of credit for this considering i posted the solution about 3 days before wayre did, if you guys check back.
Thinkpad T60p (2623 DDU)
T2500 (2Ghz), 2Gb Ram, 100Gb 7200rpm HDD, FireGL V5200, IBM a/b/g, Bluetooth, Fingerprint

wareynolds
Posts: 38
Joined: Mon Jun 19, 2006 9:32 am
Location: USA

#57 Post by wareynolds » Thu Aug 17, 2006 9:34 am

I will give you all the credit as you did mention the patches, but I can say this had Nothing to do with the AMD drivers as I have never installed those.

I am trying to figure out which option it was. I just did a clean install and I can get QE and CI to be supported. The funny thing is SSE3 does not show up in system profiler again. Should I install SSE2 AND SSE3 patch?

What program can I run in full screen OpenGL?

randomocity
Posts: 26
Joined: Thu Jul 06, 2006 8:58 pm
Location: Philadelphia, PA

#58 Post by randomocity » Thu Aug 17, 2006 10:19 am

Thanks, I guess it was the mobility drivers even though i definitely checked em off. Whatever be the case, its working and that's all that matters, no? :D As far as full screen Open GL programs, I ran doom 3 just for the sole purpose of testing, since there is a free demo and it does run naitively. As far as SSE3 not showing up, which SSE2/3 patches are you talking about? That should be installed by default and should be included in the Intel base package.
Thinkpad T60p (2623 DDU)
T2500 (2Ghz), 2Gb Ram, 100Gb 7200rpm HDD, FireGL V5200, IBM a/b/g, Bluetooth, Fingerprint

wareynolds
Posts: 38
Joined: Mon Jun 19, 2006 9:32 am
Location: USA

#59 Post by wareynolds » Thu Aug 17, 2006 11:03 am

Ok, just went trhough way to many installs. It is the mobility patch/check that freaked it out. I do not need to make all the changes, just the once modification to the ATIRadeonX1000.kext that is mentioned in post 1.

I get SSE3 to show up if I select SSE#, but not SSE2 when I install.

I will try a test of doom when I can.

gastro54
Posts: 33
Joined: Mon May 29, 2006 6:04 pm
Location: Chapel Hill

#60 Post by gastro54 » Thu Aug 17, 2006 1:55 pm

Hey, I am having tearing issues too, even with mouse locator
HackBook Pro: T60p 2623DDU / 2.0Ghz Core Duo / 1gb / 100gb 7200rpm / FireGL V5200 256mb / 15" FlexView IPS / Atheros AR5BXB6 / JaS 10.4.6 -> 10.4.7 / XBench: 92.50

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “OS-X Questions”

Who is online

Users browsing this forum: No registered users and 44 guests