I have a IBM Portable Drive Bay 2000 PCMCIA and trying to install XP on my X21 from it. When I put my XP Pro CD in, it runs but don't read on my X21. Is there a Boot disk for the bay 2000 to read?

Windows XP does not have the native device driver for this device.


Reference - http://www-307.ibm.com/pc/support/site. ... 40018.html

http://rapidshare.com/files/354120837/u ... t.exe.html

ok try this, if it's not for the 2000 it should get you in the right direction. I do have the old external IBM PCMCIA boot disk and drive, if you were really stuck I know that could work, I think it's what I modded to get the untrabay 2000 disk to work.

Im trying to use my Portable DriveBay 2000 as a External HDD using the UltraBay HDD drive in will this work?

If you mean to install from it, the problem isn't what's in the bay; it's the bay itself that doesn't have a driver (more specifically the PCMCIA card). Aside from going the USB route Harryc pointed to you might be able to use a floppy disk with F6 to load a driver or create a custom XP install CD with the driver slipstreamed in.

If you mean just as an extra drive that will work but you probably need to install the driver and it may not work with an unpartitioned drive; I think you need to partition/format the drive before putting it in the Portable DriveBay.