Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message

notebook only boots to Rescue & Recovery

E.g. 3000, IdeaPad, S- and U-Series, B-Series and so on...
Post Reply
Message
Author
stillgreenwcpus
Posts: 4
Joined: Sat Aug 30, 2008 8:52 am
Location: Southaven MS

notebook only boots to Rescue & Recovery

#1 Post by stillgreenwcpus » Sat Aug 30, 2008 9:13 am

When I turn on the Notebook the system goes directly to the Thinkvantage RnR program. I have rescued my files, and then when I do a System Restore, it sits there and does nothing. I have attempted to boot into safe mode, acts like it's going there and then the RnR launches again. Any input is appreciated.

System info: Version 3000 N100, Windows Vista Home Premium
Last edited by stillgreenwcpus on Sat Aug 30, 2008 9:34 am, edited 1 time in total.

sarbin
ThinkPadder
ThinkPadder
Posts: 1146
Joined: Sat Apr 17, 2004 11:56 pm
Location: Central VA

#2 Post by sarbin » Sat Aug 30, 2008 3:34 pm

welcome to the forum. :)

by chance, did you recently update/upgrade the r&r application?
if so, this: http://www-307.ibm.com/pc/support/site. ... MIGR-62978
might be what you're looking for.

hth.
Current: X1CT-G3 / Helix-G1 / X220 / T61p / T60p / X301 / X200T / Yoga 3 Pro
Support: T520 / T510 / T420 / T400 / R400 / T61 / Yoga 2 Pro / Yoga 13
Hall of Fame: A31p --- Retired: T43 / T30 / T22 / 600X / 380XD

stillgreenwcpus
Posts: 4
Joined: Sat Aug 30, 2008 8:52 am
Location: Southaven MS

#3 Post by stillgreenwcpus » Sun Aug 31, 2008 8:06 am

Sarbin,

Thanks for the welcome wishes. Thanks to your response. I went and copied the rNr Repair to a CD. When I go into BIOS to make sure I boot from the CD, my default boot choices are:

1: IDE ODD: HL-DT-ST DVDRAM GMA-4082N
2: SATA HDD: Toshiba MK1234GSX-(S1)
3: PCI LAN: Realtek Boot Agent

* my computer however ignores the CD and the RnR program again stares at me :? . Am I doing something wrong? thank you again.

stillgreen

sarbin
ThinkPadder
ThinkPadder
Posts: 1146
Joined: Sat Apr 17, 2004 11:56 pm
Location: Central VA

#4 Post by sarbin » Sun Aug 31, 2008 12:11 pm

are you burning the .iso file as and 'image' to the cd? or as a data disc? your boot order looks fine, but the file you dl'ed needs to be burned as an image which makes the cd bootable. i don't know what burning software you're using, but look for an option that is similar to: 'burn as/from image'.
Current: X1CT-G3 / Helix-G1 / X220 / T61p / T60p / X301 / X200T / Yoga 3 Pro
Support: T520 / T510 / T420 / T400 / R400 / T61 / Yoga 2 Pro / Yoga 13
Hall of Fame: A31p --- Retired: T43 / T30 / T22 / 600X / 380XD

stillgreenwcpus
Posts: 4
Joined: Sat Aug 30, 2008 8:52 am
Location: Southaven MS

#5 Post by stillgreenwcpus » Sun Aug 31, 2008 6:10 pm

With your help I created the CD correctly this time, the message I received on my Lenovo:
"SafeGuard Easy was not found on this computer. This program did not make any changes."

upon hard reboot, RnR comes up again; any further ideas?

sarbin
ThinkPadder
ThinkPadder
Posts: 1146
Joined: Sat Apr 17, 2004 11:56 pm
Location: Central VA

#6 Post by sarbin » Sun Aug 31, 2008 6:16 pm

dang. sorry. :(
unfortunately, i don't have any more ideas for you.

i'm sure someone more knowledgeable about rnr will stop by. you may also want to post your question in the 'general hardware/software' forum for additional exposure.
Current: X1CT-G3 / Helix-G1 / X220 / T61p / T60p / X301 / X200T / Yoga 3 Pro
Support: T520 / T510 / T420 / T400 / R400 / T61 / Yoga 2 Pro / Yoga 13
Hall of Fame: A31p --- Retired: T43 / T30 / T22 / 600X / 380XD

Stargate199
Senior Member
Senior Member
Posts: 708
Joined: Thu Jul 13, 2006 2:51 pm
Location: Atlanta, GA

#7 Post by Stargate199 » Mon Oct 06, 2008 9:47 pm

I ran into a similar problem when I tried to dual boot linux on a system. I think your MBR got corrupted. If you have XP, find a XP install CD and go to the recovery console. Select you drive and enter your password. Type FIX MBR and press enter, then FIX BOOT, and press enter, restart and it should work again. If you have Vista, you will need to find a Vista install CD. I forget where in the prompt where this happens, but on the lower left corner on the install window you should see recovery options or something like that. Click that and select fix startup. This reinstalls the vista bootloader it should work again.
I have finally rejoined the dark side.
ThinkPad T450s, Core i7 5600u, 12GB RAM, Samsung 850 EVO 500GB SSD.
Previous ThinkPads: T41, T21, 600E

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Non-ThinkPad Lenovo Laptops”

Who is online

Users browsing this forum: No registered users and 23 guests