Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message

my new external QXGA LCD monitor

LARGE picture files allowed here. Those with slow connections, beware!!! do NOT go here on your PDA or Cell Phone!
Post Reply
Message
Author
pianowizard
Senior ThinkPadder
Senior ThinkPadder
Posts: 8545
Joined: Tue Jun 28, 2005 5:07 am
Location: Ann Arbor, MI
Contact:

my new external QXGA LCD monitor

#1 Post by pianowizard » Tue Nov 25, 2008 5:56 pm

I just bought a 20.8" 2048x1536 (QXGA) LCD monitor and love it! At a pixel density of 123.1 per inch, it's far easier on the eyes than the 15.0" QXGA screen on my R50p and T43p (170.7 DPI). The viewing angle is amazing, so I believe it's IPS. It's pretty old though, probably 6 or 7 years, so the image isn't as crisp as my Dell 2407WFP. Also, I have tested my R50p and T43p as well as a friend's T60 via VGA (this monitor doesn't have DVI) and none of them can drive it at the native resolution, which is kind of disappointing. All three are capable of sending out 2048x1536 but in virtual screen mode so that only 1600x1200 is really shown on the monitor and to see the rest I have to scroll. So I'm using it with my Compaq desktop computer instead, which gets the LCD to display 2048x1536 properly. Here's a photo of this external monitor hooked up to this Compaq desktop sitting next to my R50p, both showing this forum in a 1280x960 web browser:

Image

These external QXGA LCD monitors are extremely hard to find because they were made only briefly several years back. Virtually all QXGA monitors on eBay are either CRTs or greyscale LCDs. This particular one is a very obscure model -- Raintree Systems IN2080. More info about it can be found on this site.

I highly recommend you to get one of these if you come across a reasonably priced one on eBay. It's an excellent balance between getting lots of real estate on a screen and saving space on your desk. I got lucky with this one and it cost me only $133 shipped.
Last edited by pianowizard on Fri Dec 05, 2008 5:49 pm, edited 6 times in total.
Dell Latitude 7370 (QHD+, 2.84lb); HP Pavilion x2 12-b096ms (1920x1280, 3.14lb); Microsoft Surface 3 (1920x1280, 2.00lb);
Dell OptiPlex 5040 SFF (Core i5-6600); Acer ET322QK, T272HUL; Crossover 404K; QNIX QHD2410R; Seiki Pro SM40UNP

comptiger5000
Sophomore Member
Posts: 184
Joined: Wed Oct 08, 2008 5:00 pm
Location: Stamford, CT

#2 Post by comptiger5000 » Tue Nov 25, 2008 9:45 pm

Looks awesome! I've been considering a QXGA mod for a used T43p as a second laptop (in addition to my WUXGA W500). Something with IPS would be nice (as nobody makes a 15.4" IPS display...)
Thinkpad W500 4058-CTO
T9600 (2.8ghz), 4gb, 320gb 5400rpm, WUXGA, 9 Cell, Server 2008 x64

Troels
ThinkPadder
ThinkPadder
Posts: 1028
Joined: Wed Oct 12, 2005 2:55 pm
Location: Aalborg, Denmark

#3 Post by Troels » Wed Dec 03, 2008 7:18 pm

Looks great :D
Actually the 20.8" QXGA was also, like the 15" QXGA manufactured by Idtech, and you could also get it in the IBM T210 desktop monitor, part no ITQX20.

erik
Moderator-Emeritus
Moderator-Emeritus
Posts: 3596
Joined: Sun Apr 25, 2004 12:52 pm
Location: United States

Re: my new external QXGA LCD monitor

#4 Post by erik » Fri Dec 26, 2008 12:47 am

pianowizard wrote:It's pretty old though, probably 6 or 7 years, so the image isn't as crisp as my Dell 2407WFP. Also, I have tested my R50p and T43p as well as a friend's T60 via VGA (this monitor doesn't have DVI) and none of them can drive it at the native resolution, which is kind of disappointing.
connecting the dots in red bears your answer.   most VGA cables are of poor quality and can't drive a clean QXGA signal.   if your display were digital then the above would likely be a non-issue.   you might have better luck with a higher-quality cable.

but, for $133, who can complain?   my NEC was 14X that price. :D
ThinkStation P700 | ThinkPad X1C7

mgo
thinkpads.com customer
thinkpads.com customer
Posts: 877
Joined: Wed Jun 13, 2007 10:59 pm
Location: Tucson, Az

Re: my new external QXGA LCD monitor

#5 Post by mgo » Fri Dec 26, 2008 5:22 am

pianowizard wrote:I just bought a 20.8" 2048x1536 (QXGA) LCD monitor and love it!.
I got real lucky and found two excellent Dell monitors at a local pawn shop for pennies on the dollar (almost)

One is the 1901 series and the other is the 1701 series. (19 inches and 17 inches respectively)

I also have a dandy Acer 17 incher.

These are all the matte (non-glare) finish and are silent. No buzz, hum or whine like some other brands. Not only that, they are the older 4:3 ratio which matches all my ThinkPad screens.

It's so nice to have the lighter weight LCD monitors, instead of the untra heavy CRT units we used to have to deal with!

I also got a terrific 22 inch wide screen HP monitor from the same shop, but it's that annoying shiny gloss finish, and I get tired of seeing my own ugly mug in the screen when I use it.

My point is, check out your local pawn shop stores for possible treasures that may be there collecting dust. Take in your laptop and hook it up for a quick look-see before buying. They are usually willing to let you do that.

carolin
Posts: 1
Joined: Thu Sep 10, 2009 4:58 am
Location: CULCUTTA INDIA

Re: my new external QXGA LCD monitor

#6 Post by carolin » Fri Sep 11, 2009 6:15 am

Can a hole be drilled through an LCD monitor and still have it function? I need to place control knob in the display area of an LCD monitor, but there's not enough room. This area (upper left corner) will be covered later and not seen. I was wondering if it was possible to put a hole through the screen an not effect the function of the rest of it?
Last edited by carolin on Sat Sep 19, 2009 12:45 am, edited 1 time in total.

emeraldgirl08
ThinkPadder
ThinkPadder
Posts: 1762
Joined: Sun Mar 01, 2009 6:59 pm
Location: Window Rock, Arizona

Re: my new external QXGA LCD monitor

#7 Post by emeraldgirl08 » Fri Sep 11, 2009 7:35 am

:D

Very nice price is an understatement!

Congrats!

I have taken note of the Dell you mention. I've gotten rid of my old CRT Television and am looking to replace it with a stellar (but affordable) monitor!
Thinkpad T470 | iPhone XR | mATX Comet Lake Desktop | Hackintosh Monterey | Lenovo L24q-30 Monitor

pianowizard
Senior ThinkPadder
Senior ThinkPadder
Posts: 8545
Joined: Tue Jun 28, 2005 5:07 am
Location: Ann Arbor, MI
Contact:

Re: my new external QXGA LCD monitor

#8 Post by pianowizard » Fri Sep 11, 2009 12:10 pm

emeraldgirl08 wrote:Very nice price is an understatement!
Actually, this QXGA monitor started having major problems after I'd had it for only 4 months! Now it's virtually useless. I posted it on Craigslist for $25 and no one has shown any interest yet. But I found its pixel density a bit too high anyway. I now have three Dell 2407WFP's at work and their lower density of 94.34 DPI is just right. I also don't use my QXGA T43p much any more. I'm sick of constantly leaning forward to keep my eyes close to the screen. Now I've switched almost completely to desktop computers with huge LCDs.
Dell Latitude 7370 (QHD+, 2.84lb); HP Pavilion x2 12-b096ms (1920x1280, 3.14lb); Microsoft Surface 3 (1920x1280, 2.00lb);
Dell OptiPlex 5040 SFF (Core i5-6600); Acer ET322QK, T272HUL; Crossover 404K; QNIX QHD2410R; Seiki Pro SM40UNP

virge
Senior Member
Senior Member
Posts: 950
Joined: Wed Oct 10, 2007 12:00 am
Location: San Jose, CA

Re: my new external QXGA LCD monitor

#9 Post by virge » Fri Sep 11, 2009 7:45 pm

I picked up an IBM T210 a little while back. Its a great monitor--has every adjustment possible and supports S-video in. I believe it has the same QXGA IPS panel as your monitor. Currently running it at UXGA resolution because of my video card doesn't support a higher resolution over DVI. The one thing I don't like is that the T210 has noisy fan in it to keep things cool. Does yours have a fan as well? I notice on mine, I get occasional vertical lines after I've been using it for a while. I think its a cooling issue and plan on upgrading the fan (maybe even a quieter one) when I get the chance. What was wrong with yours?
Current Thinkpads: 600E, 600X, 701C, A31 (Flexview), R51 (Flexview), R60, T42P (Flexview), TR50E, T60 (Flexview), X61s (Ultralight), Z61m (Ti) Non-Thinkpad: Toshiba 100ct

dr_st
Admin
Admin
Posts: 9691
Joined: Sat Oct 29, 2005 6:20 am
Location: Israel

Re: my new external QXGA LCD monitor

#10 Post by dr_st » Fri Sep 11, 2009 10:39 pm

pianowizard wrote:But I found its pixel density a bit too high anyway. I now have three Dell 2407WFP's at work and their lower density of 94.34 DPI is just right.
:shock: Who would have thought they would ever hear you say that? :wink:

I currently feel comfortable with ~100PPI desktop LCDs or ~120PPI laptop LCDs. Any more would probably make me a bit uncomfortable. My current main display is the 2007FP UXGA 100PPI, from which I can sit about 70cm away and still read comfortably at default font settings. My wife is somewhat unhappy with this, though. Maybe the day is not so far when I would be too? :?

I am considering getting a bigger screen, so that I can enjoy both 4:3 and widescreen content. I also like to go for IPS (which is one reason I stayed away from the 2408WFP for now)/ Ideal for me would be some 23" WUXGA IPS, since it would have almost the same physical height and PPI as the 2007FP. But no one makes these (except some Apple model, ugh). In the absence of it, the new DELL U2410 IPS seems interesting as well. Might consider that one in the future.
Thinkpad 25 (20K7), T490 (20N3), Yoga 14 (20FY), T430s (IPS FHD + Classic Keyboard), X220 4291-4BG
X61 7673-V2V, T60 2007-QPG, T42 2373-F7G, X32 (IPS Screen), A31p w/ Ultrabay Numpad

pianowizard
Senior ThinkPadder
Senior ThinkPadder
Posts: 8545
Joined: Tue Jun 28, 2005 5:07 am
Location: Ann Arbor, MI
Contact:

Re: my new external QXGA LCD monitor

#11 Post by pianowizard » Sat Sep 12, 2009 8:11 am

virge wrote:What was wrong with yours?
It happened in 3 stages. First, the rightmost 1-inch column of the screen started to show flickering lines. After several weeks, that column wouldn't light up at all. Finally, the rest of the sceen suddenly became very dim and often showed afterimages.
dr_st wrote::shock: Who would have thought they would ever hear you say that? :wink:
You shouldn't have been surprised. I've never been a huge fan of high DPI per se. I've always been aware that low DPI is easier on the eyes and thus prefer such monitors whenever possible. But I also need an enormous amount of real estate! It's easy to get both with desktop monitors, but for laptops, I need to sacrifice one of them, and I choose to sacrifice comfort. I wish there were sub-4-pound 17" 1920x1200 laptops!
dr_st wrote:I am considering getting a bigger screen, so that I can enjoy both 4:3 and widescreen content.
I highly recommend you to consider the arrangement that I currently have. I don't mean to brag but I really think it's the best setup I've ever seen. Three 24" 1920x1200 LCDs, with one in normal landscape orientation and the others in portrait. When I need widescreen (e.g. to watch a movie), I use the landscape LCD, but when I want lots of vertical real estate, the rotated LCDs give me 1920 rows of pixels! That's my rig at work. At home, I have a slightly scaled down version: a 2408WFP in landscape mode, and two 20" UXGA LCDs (a beautiful 2007FP and a Samsung 204B with terrible TN) in portrait mode.
Dell Latitude 7370 (QHD+, 2.84lb); HP Pavilion x2 12-b096ms (1920x1280, 3.14lb); Microsoft Surface 3 (1920x1280, 2.00lb);
Dell OptiPlex 5040 SFF (Core i5-6600); Acer ET322QK, T272HUL; Crossover 404K; QNIX QHD2410R; Seiki Pro SM40UNP

dr_st
Admin
Admin
Posts: 9691
Joined: Sat Oct 29, 2005 6:20 am
Location: Israel

Re: my new external QXGA LCD monitor

#12 Post by dr_st » Sat Sep 12, 2009 3:11 pm

pianowizard wrote:I highly recommend you to consider the arrangement that I currently have. I don't mean to brag but I really think it's the best setup I've ever seen. Three 24" 1920x1200 LCDs, with one in normal landscape orientation and the others in portrait. When I need widescreen (e.g. to watch a movie), I use the landscape LCD, but when I want lots of vertical real estate, the rotated LCDs give me 1920 rows of pixels! That's my rig at work. At home, I have a slightly scaled down version: a 2408WFP in landscape mode, and two 20" UXGA LCDs (a beautiful 2007FP and a Samsung 204B with terrible TN) in portrait mode.
That's a highly interesting and useful setup, however I don't think I need that much space (heck, I don't think I have that much space on my desk!). Besides, I think i would find 24" in portrait mode too high, and, even more unfortunate, text in portrait mode does not look good with Cleartype.

But overall, your setup does sound amazing. There is only one setup that I would consider better - the "Cody Control Centre" from Youtube - running a 3007WFP, with two 2007FPs in portrait on the sides of it, for a total resolution of 4960x1600! On this setup, the overall real estate is slightly higher, plus the vertical resolution is consistent, and amazingly the physical size (and therefore PPI) is almost equal between the 30" and the 20". However, your setup does allow more vertical lines, which can be a big advantage for certain tasks. :D
Thinkpad 25 (20K7), T490 (20N3), Yoga 14 (20FY), T430s (IPS FHD + Classic Keyboard), X220 4291-4BG
X61 7673-V2V, T60 2007-QPG, T42 2373-F7G, X32 (IPS Screen), A31p w/ Ultrabay Numpad

Troels
ThinkPadder
ThinkPadder
Posts: 1028
Joined: Wed Oct 12, 2005 2:55 pm
Location: Aalborg, Denmark

Re: my new external QXGA LCD monitor

#13 Post by Troels » Sat Sep 12, 2009 5:28 pm

carolin wrote:Can a hole be drilled through an LCD monitor and still have it function? I need to place control knob in the display area of an LCD monitor, but there's not enough room. This area (upper left corner) will be covered later and not seen. I was wondering if it was possible to put a hole through the screen an not effect the function of the rest of it?
LCDs work coloumnwise and row wise. Theoretically, if you drilled a hole in the middle of the LCD, you'd end up with a white or black cross on the LCD, and it would be totally trashed.
In the upper left corner (or upper part of the LCD), a LCD driver board is usually positioned in that region, right behind the LCD panel. You'd also ruin it totally by doing that.

Pianowizard - sorry to hear that the LCD stopped working, even if it was uncomfotable to use, it's always irritating when things go bad :(
If one had a LCD driver board to test the panel with, that would be nice... there's still a good chance that it might be the driver board only. darn, it's tempting to repair :D

pianowizard
Senior ThinkPadder
Senior ThinkPadder
Posts: 8545
Joined: Tue Jun 28, 2005 5:07 am
Location: Ann Arbor, MI
Contact:

Re: my new external QXGA LCD monitor

#14 Post by pianowizard » Tue Sep 15, 2009 9:39 am

dr_st wrote:I also like to go for IPS (which is one reason I stayed away from the 2408WFP for now)
After owning my 2408WFP for close to a month, I am now more hesitant to recommend it. It's a fanTAStic, flawless LCD when driven through DVI with a modern graphics card. But don't buy it if you plan on using VGA or an old graphics card, especially if it's an ATI card. It's one of those LCDs that look crappy with VGA input, and I know it's not due to the cable or the video card because all of my 2407WFP's look great using the same cable and card. But the other issue is even more serious: old ATI cards have difficulty waking up the 2408WFP from Power Save Mode. You can read all about this issue on the Dell Community site. As you can see in that thread, there are ways to get around this problem, but they don't always work. Luckily they worked for me, which was why I posted there earlier today to thank those guys for sharing them.

On the other hand, for people who have moden graphics cards and plan to use DVI, I still recommend the 2408WFP wholeheartedly.
Troels wrote:Pianowizard - sorry to hear that the LCD stopped working, even if it was uncomfotable to use, it's always irritating when things go bad :(
If one had a LCD driver board to test the panel with, that would be nice...
Yeah, I wish I had the equipment and knowledge to diagnose the problem. If anyone in the Boston/Providence area is interested in giving it a try, you are welcome to have this QXGA LCD for $10. You'd need to pick it up in person though.
Dell Latitude 7370 (QHD+, 2.84lb); HP Pavilion x2 12-b096ms (1920x1280, 3.14lb); Microsoft Surface 3 (1920x1280, 2.00lb);
Dell OptiPlex 5040 SFF (Core i5-6600); Acer ET322QK, T272HUL; Crossover 404K; QNIX QHD2410R; Seiki Pro SM40UNP

virge
Senior Member
Senior Member
Posts: 950
Joined: Wed Oct 10, 2007 12:00 am
Location: San Jose, CA

Re: my new external QXGA LCD monitor

#15 Post by virge » Tue Oct 13, 2009 3:59 pm

Came across this while searching for an LCD: http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0404865258

I have no idea whether this is the correct "LCD driver board" that's been referred to in the thread. Its described as for an IBM QXGA LCD.

@Pianowizard: Maybe its worth a shot to open up your monitor and see if the same part was used?
Current Thinkpads: 600E, 600X, 701C, A31 (Flexview), R51 (Flexview), R60, T42P (Flexview), TR50E, T60 (Flexview), X61s (Ultralight), Z61m (Ti) Non-Thinkpad: Toshiba 100ct

crashnburn
ThinkPadder
ThinkPadder
Posts: 1724
Joined: Sat Apr 22, 2006 4:26 pm
Location: TX, USA & Bombay, India

Re: my new external QXGA LCD monitor

#16 Post by crashnburn » Fri Jul 30, 2010 6:48 pm

dr_st wrote:I also like to go for IPS (which is one reason I stayed away from the 2408WFP for now)
pianowizard wrote: After owning my 2408WFP for close to a month, I am now more hesitant to recommend it. It's a fanTAStic, flawless LCD when driven through DVI with a modern graphics card. But don't buy it if you plan on using VGA or an old graphics card, especially if it's an ATI card. It's one of those LCDs that look crappy with VGA input, and I know it's not due to the cable or the video card because all of my 2407WFP's look great using the same cable and card. But the other issue is even more serious: old ATI cards have difficulty waking up the 2408WFP from Power Save Mode. You can read all about this issue on the Dell Community site. As you can see in that thread, there are ways to get around this problem, but they don't always work. Luckily they worked for me, which was why I posted there earlier today to thank those guys for sharing them.

On the other hand, for people who have moden graphics cards and plan to use DVI, I still recommend the 2408WFP wholeheartedly.
Troels wrote:Pianowizard - sorry to hear that the LCD stopped working, even if it was uncomfotable to use, it's always irritating when things go bad :(
If one had a LCD driver board to test the panel with, that would be nice...
pianowizard wrote: Yeah, I wish I had the equipment and knowledge to diagnose the problem. If anyone in the Boston/Providence area is interested in giving it a try, you are welcome to have this QXGA LCD for $10. You'd need to pick it up in person though.
Still have it? I am guessing someone has to pry out the 15" QXGA LCD from your LCD Monitor?
T61 8892-02U: 14.1"SXGA+/2.2C2D/4G/XP|Adv Mini Dock|30" Gateway XHD3000 WQXGA via Dual-link DVI
X61T 7767-96U: 12.1"SXGA+/1.6C2D/3G/Vista|Ultrabase
W510 4319-2PU: 15.6"FHD/i7-720QM/4G/Win7Pro64 (for dad)
T43 1875-DLU: 14.1"XGA/1.7PM-740/1G/XP (Old)

pianowizard
Senior ThinkPadder
Senior ThinkPadder
Posts: 8545
Joined: Tue Jun 28, 2005 5:07 am
Location: Ann Arbor, MI
Contact:

Re: my new external QXGA LCD monitor

#17 Post by pianowizard » Fri Jul 30, 2010 8:11 pm

crashnburn wrote:Still have it? I am guessing someone has to pry out the 15" QXGA LCD from your LCD Monitor?
It was 20.8", not 15". And I sold it for $10 long ago.
Dell Latitude 7370 (QHD+, 2.84lb); HP Pavilion x2 12-b096ms (1920x1280, 3.14lb); Microsoft Surface 3 (1920x1280, 2.00lb);
Dell OptiPlex 5040 SFF (Core i5-6600); Acer ET322QK, T272HUL; Crossover 404K; QNIX QHD2410R; Seiki Pro SM40UNP

ZaZ
Moderator
Moderator
Posts: 4697
Joined: Fri May 13, 2005 1:33 pm
Location: Minnesota

Re: my new external QXGA LCD monitor

#18 Post by ZaZ » Fri Jul 30, 2010 8:53 pm

I have a 20" UXGA monitor in portrait mode on my desktop. I'd love to get a QXGA for the same purposes, but the only ones I've seen are like $3k and it ain't work that much to me.
ThinkPad L14 - 2.1GHz Ryzen 4650U | 16GB | 256GB | 14" FHD | Win11P
ProBook 470 G5 - 1.6GHz Core i5 | 16GB | 2.2TB | 17" FHD | Mint

crashnburn
ThinkPadder
ThinkPadder
Posts: 1724
Joined: Sat Apr 22, 2006 4:26 pm
Location: TX, USA & Bombay, India

Re: my new external QXGA LCD monitor

#19 Post by crashnburn » Thu Aug 18, 2011 10:36 am

Wow! These are nice :)
T61 8892-02U: 14.1"SXGA+/2.2C2D/4G/XP|Adv Mini Dock|30" Gateway XHD3000 WQXGA via Dual-link DVI
X61T 7767-96U: 12.1"SXGA+/1.6C2D/3G/Vista|Ultrabase
W510 4319-2PU: 15.6"FHD/i7-720QM/4G/Win7Pro64 (for dad)
T43 1875-DLU: 14.1"XGA/1.7PM-740/1G/XP (Old)

pianowizard
Senior ThinkPadder
Senior ThinkPadder
Posts: 8545
Joined: Tue Jun 28, 2005 5:07 am
Location: Ann Arbor, MI
Contact:

Re: my new external QXGA LCD monitor

#20 Post by pianowizard » Wed Dec 23, 2015 10:55 am

I am reviving this old thread to comment on the LCD industry's impressive recent advances. These are exciting times for us LCD enthusiasts indeed, and I will limit this post to desktop monitors.

Before 2005, only several sizes and resolutions were readily available: 15" 1024x768, 17" 1280x1024, 19" 1280x1024, 20" 1600x1200, 20" 1680x1050, 22" 1680x1050, and 24" 1920x1200. The only high-res LCD monitors were 20.8" 2048x1536 (e.g. the subject of this thread) and 22.2" 3840x2400 (IBM T220 and T221), but they were rare, bulky and prohibitively expensive, and the T220/221 required special video cards. Then, in 2005, the first 30" 2560x1600 monitor (Apple's Cinema Display) came out, which was an exciting addition but unfortunately 30" 2560x1600 remained the highest widely available resolution for a while.

However, since 2012, the number of options exploded thanks to Apple's popularization of "retina" resolutions and the industry's push for 4K televisions. Nowadays, my favorite form factor is 40" (39.5" viewable) 3840x2160, and I now have two such monitors (see http://forum.thinkpads.com/viewtopic.php?t=52525). In a way, the subject of this thread (20.8" QXGA) has "reincarnated" as 24" (23.75" viewable) 2560x1440, whose 123.7 DPI pixel density is nearly identical (123.1 DPI for 20.8" QXGA), though total pixel count has gone up 17.2%. Even the T220/221's 22.2" 3840x2400 has been exceeded in both pixel count and density by 27" 5120x2880 monitors.

Here's a photo of my Dell P2416D, next to my Dell OptiPlex 790 USFF desktop:

Image
pianowizard wrote:But I found its pixel density a bit too high anyway. I now have three Dell 2407WFP's at work and their lower density of 94.34 DPI is just right.
I wrote that in Sep 2009. Since then I have adjusted to higher DPIs. These days, I consider 110 DPI to be the sweet spot for desktop displays that aren't scaled. Several size/res combinations are between 108 DPI and 113 DPI:

27" 2560x1440 @ 108.8 DPI (I have three)
34" 3440x1440 @ 109.7 DPI
25" 2560x1080 @ 111.1 DPI (I had one)
39.5" 3840x2160 @ 111.5 DPI (I have two)
19.5" 1920x1080 @ 113.0 DPI

The above-mentioned 24" 2560x1440 (123.7 DPI) looks significantly smaller than 108-113 DPI, but it's still reasonably comfortable for me to view even without scaling. The next higher pixel density is 139.9, on 32" (31.5" viewable) 3840x2160 screens. I haven't tried one yet but I probably would need to scale at 125%. I certainly needed to scale the 28" 3840x2160 Dell P2815Q (157.4 DPI) that I had for a year.
dr_st wrote:I think i would find 24" in portrait mode too high
That corresponds to a screen height of 20.35", which is tall but not "too" tall IMO. My rotated Dell P2416D is 20.70" in height, while the 39.5" monitors are 19.37" tall. Actually, my 27" HP ZR2740w is rotated as well! At 23.53", it does feel slightly too tall, but just slightly. Rotated widescreen monitors not only display more lines of text and save desk space, but also encourage the user to sit up straight. Hunching is one of the many reasons I dislike laptops.
Dell Latitude 7370 (QHD+, 2.84lb); HP Pavilion x2 12-b096ms (1920x1280, 3.14lb); Microsoft Surface 3 (1920x1280, 2.00lb);
Dell OptiPlex 5040 SFF (Core i5-6600); Acer ET322QK, T272HUL; Crossover 404K; QNIX QHD2410R; Seiki Pro SM40UNP

ZaZ
Moderator
Moderator
Posts: 4697
Joined: Fri May 13, 2005 1:33 pm
Location: Minnesota

Re: my new external QXGA LCD monitor

#21 Post by ZaZ » Wed Dec 23, 2015 1:57 pm

I want to get a pair of these, but at $1,300 a pop, it'll have to wait until I win the lottery. My 2007FP in portrait mode is slightly too narrow for some websites, so you a scroll bar on the bottom, which isn't a big deal. I thought about maybe a 24" or 25" WQXGA LCD in portrait mode, but I think that's too tall for me at least and I like the fact that both my monitors have the same pixel density.
ThinkPad L14 - 2.1GHz Ryzen 4650U | 16GB | 256GB | 14" FHD | Win11P
ProBook 470 G5 - 1.6GHz Core i5 | 16GB | 2.2TB | 17" FHD | Mint

pianowizard
Senior ThinkPadder
Senior ThinkPadder
Posts: 8545
Joined: Tue Jun 28, 2005 5:07 am
Location: Ann Arbor, MI
Contact:

Re: my new external QXGA LCD monitor

#22 Post by pianowizard » Wed Dec 23, 2015 7:29 pm

ZaZ wrote:I want to get a pair of these, but at $1,300 a pop, it'll have to wait until I win the lottery.
Most interesting! Thanks for mentioning this unique 1920x1920 monitor! I was not even aware of any 1:1 ratio monitors!
ZaZ wrote:My 2007FP in portrait mode is slightly too narrow for some websites, so you a scroll bar on the bottom, which isn't a big deal. I thought about maybe a 24" or 25" WQXGA LCD in portrait mode, but I think that's too tall for me at least and I like the fact that both my monitors have the same pixel density.
Have you considered the portrait-landscape-portrait setup dr_st described in his Sep 12th 2009 post, quoted below:
dr_st wrote:But overall, your setup does sound amazing. There is only one setup that I would consider better - the "Cody Control Centre" from Youtube - running a 3007WFP, with two 2007FPs in portrait on the sides of it, for a total resolution of 4960x1600! On this setup, the overall real estate is slightly higher, plus the vertical resolution is consistent, and amazingly the physical size (and therefore PPI) is almost equal between the 30" and the 20".
If you Google up "2007FP 3007WFP" (without the quotation marks) and view the image results, you will see lots of people showing off their 2007FP-3007WFP-2007FP setups. Of course you don't have to buy a 3007WFP, which is now almost 10 years old. eBay has many very affordable brand new 30" 2560x1600 monitors from Korea. This one is only $331.90 shipped, though it's a bit ugly and takes only dual-link DVI input: http://www.ebay.com/itm/Perfect-Pixel-F ... Sw9N1Vk6GE
Dell Latitude 7370 (QHD+, 2.84lb); HP Pavilion x2 12-b096ms (1920x1280, 3.14lb); Microsoft Surface 3 (1920x1280, 2.00lb);
Dell OptiPlex 5040 SFF (Core i5-6600); Acer ET322QK, T272HUL; Crossover 404K; QNIX QHD2410R; Seiki Pro SM40UNP

ZaZ
Moderator
Moderator
Posts: 4697
Joined: Fri May 13, 2005 1:33 pm
Location: Minnesota

Re: my new external QXGA LCD monitor

#23 Post by ZaZ » Wed Dec 23, 2015 11:56 pm

Yes, those Eizo's are pretty slick, but not worth $2,500 to me since I'd need two. Hopefully, a more value oriented LCD company will come out with something similar.

I don't have room on my desk for a third monitor and I'm pretty happy with the Dells, so I'll stick with what I got for now.
ThinkPad L14 - 2.1GHz Ryzen 4650U | 16GB | 256GB | 14" FHD | Win11P
ProBook 470 G5 - 1.6GHz Core i5 | 16GB | 2.2TB | 17" FHD | Mint

automobus
Senior Member
Senior Member
Posts: 546
Joined: Sun Jan 24, 2010 5:32 pm
Location: USA : Illinois : Chicago

Re: my new external QXGA LCD monitor

#24 Post by automobus » Thu Dec 24, 2015 12:07 am

ZaZ wrote:these
ONFG, my impulse is to bookmark it, and buy it when next I need a monitor. But, expletive! Some geniuses decided to put HDCP in it. Do not want.
ZaZ wrote:Hopefully, a more value oriented LCD company will come out with something similar.
Hopefully, 'value' means 'no HDCP' and 'no PWM' and 'no capacitive touch instead of real buttons'.

pianowizard
Senior ThinkPadder
Senior ThinkPadder
Posts: 8545
Joined: Tue Jun 28, 2005 5:07 am
Location: Ann Arbor, MI
Contact:

Re: my new external QXGA LCD monitor

#25 Post by pianowizard » Thu Dec 24, 2015 9:50 am

ZaZ wrote:Yes, those Eizo's are pretty slick, but not worth $2,500 to me since I'd need two. Hopefully, a more value oriented LCD company will come out with something similar.
Why do you find it better to have two 26.5" 1920x1920 monitors, than having one 40" 3840x2160 monitor? The latter requires just one video output, has more total real estate, occupies slightly less space on your desk, and costs much less. I paid $499 shipped for my Crossover 404K from eBay, and $448 shipped for my Seiki Pro SM40UNP from Newegg. They were brand new.
ZaZ wrote:I don't have room on my desk for a third monitor and I'm pretty happy with the Dells, so I'll stick with what I got for now.
If I were you, I would sell both 2007FP's and upgrade to a single, much bigger widescreen display. You wouldn't get much money for these 2007FP's though, probably only $30 each. I bought my first 2007FP new in Aug 2008 for $150, but the second one (used) in Jan 2013 for $38. Both were local Craigslist transactions.
automobus wrote:Hopefully, 'value' means 'no HDCP' and 'no PWM' and 'no capacitive touch instead of real buttons'.
I too hate monitors (or most electronic devices for that matter) that use touch buttons instead of real buttons, because I have to look at them to use them. Also, many of them are oversensitive, so that even though I intend to push the button just once, it's often detected as two or more pushes.
Dell Latitude 7370 (QHD+, 2.84lb); HP Pavilion x2 12-b096ms (1920x1280, 3.14lb); Microsoft Surface 3 (1920x1280, 2.00lb);
Dell OptiPlex 5040 SFF (Core i5-6600); Acer ET322QK, T272HUL; Crossover 404K; QNIX QHD2410R; Seiki Pro SM40UNP

ZaZ
Moderator
Moderator
Posts: 4697
Joined: Fri May 13, 2005 1:33 pm
Location: Minnesota

Re: my new external QXGA LCD monitor

#26 Post by ZaZ » Thu Dec 24, 2015 1:04 pm

pianowizard wrote:Why do you find it better to have two 26.5" 1920x1920 monitors, than having one 40" 3840x2160 monitor?
I have two LCDs because I like doing two things at once, each on their own screen. I'm not a tab person. In Firefox, I prefer to open a link in a new window and have it fill the window, which would make doing something else a problem with one screen. Then I can set my Logitech mouse to close the top window with the wheel click, which I also like.
ThinkPad L14 - 2.1GHz Ryzen 4650U | 16GB | 256GB | 14" FHD | Win11P
ProBook 470 G5 - 1.6GHz Core i5 | 16GB | 2.2TB | 17" FHD | Mint

pianowizard
Senior ThinkPadder
Senior ThinkPadder
Posts: 8545
Joined: Tue Jun 28, 2005 5:07 am
Location: Ann Arbor, MI
Contact:

Re: my new external QXGA LCD monitor

#27 Post by pianowizard » Sun Dec 27, 2015 9:57 am

ZaZ wrote:I have two LCDs because I like doing two things at once, each on their own screen. I'm not a tab person.
I too dislike tabs, but prefer to spread out a bunch of windows. I have seven windows on my three screens as we speak, and I am just doing light work!
ZaZ wrote:In Firefox, I prefer to open a link in a new window and have it fill the window, which would make doing something else a problem with one screen.
In Windows 10, we can use Windows Key + left/right arrow to get the active window to occupy the left/right half of the screen, kind of like maximizing a window on the left/right monitor. But I don't know if this shortcut works in Windows 7, which I suspect you are using.
Dell Latitude 7370 (QHD+, 2.84lb); HP Pavilion x2 12-b096ms (1920x1280, 3.14lb); Microsoft Surface 3 (1920x1280, 2.00lb);
Dell OptiPlex 5040 SFF (Core i5-6600); Acer ET322QK, T272HUL; Crossover 404K; QNIX QHD2410R; Seiki Pro SM40UNP

ZaZ
Moderator
Moderator
Posts: 4697
Joined: Fri May 13, 2005 1:33 pm
Location: Minnesota

Re: my new external QXGA LCD monitor

#28 Post by ZaZ » Sun Dec 27, 2015 10:10 pm

Yes, that does work in Windows 7. For me the marginal value is pretty low since I'm mostly happy with what I have now.
ThinkPad L14 - 2.1GHz Ryzen 4650U | 16GB | 256GB | 14" FHD | Win11P
ProBook 470 G5 - 1.6GHz Core i5 | 16GB | 2.2TB | 17" FHD | Mint

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Pictures of your ThinkPad & desk setup”

Who is online

Users browsing this forum: No registered users and 30 guests