Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
x300 with WWAN mc8775
x300 with WWAN mc8775
Hello all
i've got here a brand new x300 with no wwan from the factory.
so naturally i wanted a built-in HSDPA and went for getting this sierra wireless mc8775 card like reccomended around here.
i've tried to install it but got the 1804 error
the laptop currently has the newest bios version since i've ran all the updates that the system update gave me.
any ideas on how to safely bypass this issue ?
afterwards i'm planning to get the dc-unlocker to unlock it (if it's at&t / cingullar locked) - does anyone think's theres something better ?
thanks in advance for a fast reply
Tal.
i've got here a brand new x300 with no wwan from the factory.
so naturally i wanted a built-in HSDPA and went for getting this sierra wireless mc8775 card like reccomended around here.
i've tried to install it but got the 1804 error
the laptop currently has the newest bios version since i've ran all the updates that the system update gave me.
any ideas on how to safely bypass this issue ?
afterwards i'm planning to get the dc-unlocker to unlock it (if it's at&t / cingullar locked) - does anyone think's theres something better ?
thanks in advance for a fast reply
Tal.
Laptops and network service advisor
Welcome to the forum - Lord-Soth.
This subject has extensively been covered in the ThinkPad T6x Series forum - Your BIOS will need to be modified to get past Lenovo's whitelist. I have successfully installed an HP hs2300/MC8775 WWAN (Unlocked) within my T60p by updating the .FL1 BIOS file.
DC-Unlocker is the only vendor I know of, that is available to unlock Sierra Wireless devices (and others too!).
This subject has extensively been covered in the ThinkPad T6x Series forum - Your BIOS will need to be modified to get past Lenovo's whitelist. I have successfully installed an HP hs2300/MC8775 WWAN (Unlocked) within my T60p by updating the .FL1 BIOS file.
DC-Unlocker is the only vendor I know of, that is available to unlock Sierra Wireless devices (and others too!).
T60F: (Integrated Intel GPU) - [Another T60 FrankenPad!...Different approach]
R60F: (Integrated Intel GPU) - [ThinkPad R60 15.0" FrankenPad]
R60F: (Integrated Intel GPU) - [ThinkPad R60 15.0" FrankenPad]
mc8775
Thanks alot for the modded bios
it helped alot in progressing with this thing.
but now i'm stuck in this situatuation :
WWAN (mc8775) card - unlocked, voice enabled - dc-unlocker
bios - zender modded bios
os : vista - with updates, no sp1
i currently have control over the wwan card (i can voice dial out or recieve calls, and send sms messages)
but when i use the data function and press the connect button in the 3g watcher (sierra's program for the card) after the connection is established i'm not able to see internet, and bytes aren't counting in or out.
also the status of the card in the network and sharing center shows it has limited connectivity and it can't get response from the dns server. (all switches are set to auto)
thanks in advance for a fast reply
it helped alot in progressing with this thing.
but now i'm stuck in this situatuation :
WWAN (mc8775) card - unlocked, voice enabled - dc-unlocker
bios - zender modded bios
os : vista - with updates, no sp1
i currently have control over the wwan card (i can voice dial out or recieve calls, and send sms messages)
but when i use the data function and press the connect button in the 3g watcher (sierra's program for the card) after the connection is established i'm not able to see internet, and bytes aren't counting in or out.
also the status of the card in the network and sharing center shows it has limited connectivity and it can't get response from the dns server. (all switches are set to auto)
thanks in advance for a fast reply
Laptops and network service advisor
-
- Sophomore Member
- Posts: 179
- Joined: Wed May 02, 2007 5:38 pm
- Location: Jersey,UK
In Sierra's app does it show up as 'Edge','HSDPA' etc (on the top line of the virtual LCD screen) ?
Does you service provider give out 3G data enabled SIM cards or do you need to ask for one? Does you SIM card work in other data devices (3G phone etc) ?
Does you service provider give out 3G data enabled SIM cards or do you need to ask for one? Does you SIM card work in other data devices (3G phone etc) ?
X60 - upgraded to a X61 2.5Ghz motherboard and 8GB RAM (Windows 7 Ultimate 64 bit) 64GB SSD
X61 - 2Ghz and 4GB RAM (Windows 7 Home Premium 64 bit) 32GB SSD
USB DVD-RW DL/Blu-Ray reader
X61 - 2Ghz and 4GB RAM (Windows 7 Home Premium 64 bit) 32GB SSD
USB DVD-RW DL/Blu-Ray reader
mc8775
yes to all of the above
when i take the sim card out of the laptop and put it inside my usb modem , it works , but when put inside my x300 - it works but can't get an ip address
also , i've unistalled vista and have put a clean xp pro installation and whoola ... it works smoothly under windows xp.
when i take the sim card out of the laptop and put it inside my usb modem , it works , but when put inside my x300 - it works but can't get an ip address
also , i've unistalled vista and have put a clean xp pro installation and whoola ... it works smoothly under windows xp.
Laptops and network service advisor
zender
i've did all that
same apn for my local network in xp and vista
vista doesn't get an ip and xp works smoothly
maybe it's because the original watcher that came with the card (cingullar's) is working on my xp
and on vista i'm using sierra's 3g watcher ?
any reccomendations for a program that works on vista ?
same apn for my local network in xp and vista
vista doesn't get an ip and xp works smoothly
maybe it's because the original watcher that came with the card (cingullar's) is working on my xp
and on vista i'm using sierra's 3g watcher ?
any reccomendations for a program that works on vista ?
Laptops and network service advisor
Which version of the Sierra Wireless Watcher software do you have installed? - Version R2.4.0.1.1618 supports Vista.
T60F: (Integrated Intel GPU) - [Another T60 FrankenPad!...Different approach]
R60F: (Integrated Intel GPU) - [ThinkPad R60 15.0" FrankenPad]
R60F: (Integrated Intel GPU) - [ThinkPad R60 15.0" FrankenPad]
-
- Freshman Member
- Posts: 112
- Joined: Fri Nov 02, 2007 5:51 pm
- Location: Salmiya, Kuwait
- Contact:
Re: x300 with WWAN mc8775
Hi Tal,Lord-Soth wrote:Hello all
i've got here a brand new x300 with no wwan from the factory.
so naturally i wanted a built-in HSDPA and went for getting this sierra wireless mc8775 card like reccomended around here.
i've tried to install it but got the 1804 error
the laptop currently has the newest bios version since i've ran all the updates that the system update gave me.
any ideas on how to safely bypass this issue ?
afterwards i'm planning to get the dc-unlocker to unlock it (if it's at&t / cingullar locked) - does anyone think's theres something better ?
thanks in advance for a fast reply
Tal.
from where did you buy MC8775 ?
Bashar Al-Abdulhadi
Please refer to this post:linkBashar wrote:Hi Tal,
from where did you buy MC8775 ?
T60F: (Integrated Intel GPU) - [Another T60 FrankenPad!...Different approach]
R60F: (Integrated Intel GPU) - [ThinkPad R60 15.0" FrankenPad]
R60F: (Integrated Intel GPU) - [ThinkPad R60 15.0" FrankenPad]
hornet5 wrote:How to install the latest drivers for HP version of MC8775 (I mean Sierra Wireless drivers)?
Download the HP WWAN Broadband Wireless Drivers 2.0.16.0 from HP's website, click on the "sp36889.exe setup" icon and follow the on-screen prompts etc. - Works OK with the generic Sierra Wireless 3G Watcher Utility (R2.4.0.1.1618) under Win-XP.
T60F: (Integrated Intel GPU) - [Another T60 FrankenPad!...Different approach]
R60F: (Integrated Intel GPU) - [ThinkPad R60 15.0" FrankenPad]
R60F: (Integrated Intel GPU) - [ThinkPad R60 15.0" FrankenPad]
Thanks for the answer but I meant generic drivers from Sierra Wireless website, which, I think, needs some customization of Device ID (SW to HP).
But I have second question: to enable Fn+F5 working for this HP card I need to edit AcAdaptersInfo.dll file and replace the VENdor and DEVice ID which should be in form of VEN_xxxx&DEV_xxxx. Normally it can be found in Device Manager and is called Hardware IDs. But in mine I can find only: SWMUXBUS\SW_NET_0_VID_030f&PID_1e1d.
Is there any workaround in this case?
But I have second question: to enable Fn+F5 working for this HP card I need to edit AcAdaptersInfo.dll file and replace the VENdor and DEVice ID which should be in form of VEN_xxxx&DEV_xxxx. Normally it can be found in Device Manager and is called Hardware IDs. But in mine I can find only: SWMUXBUS\SW_NET_0_VID_030f&PID_1e1d.
Is there any workaround in this case?
The Hardware ID's you found in the Device Manager SWMUXBUS\SW_NET_0_VID_030f&PID_1e1d are similar to the existing one's that appear in the AcAdaptersInfo.dll file using a Hex editor (eg VID_1199 & PID_6804 (MC8755) - VID = Vendor ID & PID = Product ID?). It maybe possible that when replace the VID's & PID's with the HP VID & PID in AcAdaptersInfo.dll & Acon.dll you might be able to see the WWAN Icon in Fn+F5 & also configure the WWAN card settings using the Access Connections utility???
If forum members have modified Access Connections with some success, please post on your procedures and experiences - thanks
If forum members have modified Access Connections with some success, please post on your procedures and experiences - thanks
T60F: (Integrated Intel GPU) - [Another T60 FrankenPad!...Different approach]
R60F: (Integrated Intel GPU) - [ThinkPad R60 15.0" FrankenPad]
R60F: (Integrated Intel GPU) - [ThinkPad R60 15.0" FrankenPad]
-
- Posts: 17
- Joined: Sat May 03, 2008 4:52 pm
- Location: Taipei, Taiwan
to hornet5:
1. If you're using HP's hs2300 WWAN card, you must use the HP driver or else it'll never install properly. Forget the generic driver from Sierra, apply it only after you install the HP driver to get 3G watcher working.
2. Both AcAdaptersInfo.dll AND Acon.dll need to be edited to work with non-Lenovo branded WWAN card.
3. Throw those 2 files in a HEX editor and search for 6813 (with Unicode box checked), and you'll see a set of values that goes V.I.D._.1.1.9.9.&.P.I.D._.6.8.1.3
4. Now change 1199 to 03f0 and then change 6813 to 1e1d
There should be 2 sets of these values in each of the file, so total 4 sets of values to change.
ONLY change the 1199:6813 value set, DON'T go changing all the 1199 values, that way, AC won't be able to tell what's what. Reason why we're editing this particular VID&PID is that this is the exact one for MC8775, assuming you're using HP's hs2300 WWAN (which is essentially an equivalent of MC8775 just with a different Hardware ID)
In both files these values will come in the form of 1‧1‧9‧9 and 6‧8‧1‧3, make sure when you change them you don't touch the "DOTs" in between.
AGAIN, In each file, there are 2 modifications needed (1199:6813 appears in 2 places), so total of 4 modifications for the 2 files that we are modifying.
5. After you're done, just replace them with the original files and reboot.
This is how I got the HP hs2300 to work with AC Fn+F5 before and good luck.
1. If you're using HP's hs2300 WWAN card, you must use the HP driver or else it'll never install properly. Forget the generic driver from Sierra, apply it only after you install the HP driver to get 3G watcher working.
2. Both AcAdaptersInfo.dll AND Acon.dll need to be edited to work with non-Lenovo branded WWAN card.
3. Throw those 2 files in a HEX editor and search for 6813 (with Unicode box checked), and you'll see a set of values that goes V.I.D._.1.1.9.9.&.P.I.D._.6.8.1.3
4. Now change 1199 to 03f0 and then change 6813 to 1e1d
There should be 2 sets of these values in each of the file, so total 4 sets of values to change.
ONLY change the 1199:6813 value set, DON'T go changing all the 1199 values, that way, AC won't be able to tell what's what. Reason why we're editing this particular VID&PID is that this is the exact one for MC8775, assuming you're using HP's hs2300 WWAN (which is essentially an equivalent of MC8775 just with a different Hardware ID)
In both files these values will come in the form of 1‧1‧9‧9 and 6‧8‧1‧3, make sure when you change them you don't touch the "DOTs" in between.
AGAIN, In each file, there are 2 modifications needed (1199:6813 appears in 2 places), so total of 4 modifications for the 2 files that we are modifying.
5. After you're done, just replace them with the original files and reboot.
This is how I got the HP hs2300 to work with AC Fn+F5 before and good luck.
Last edited by perfecblue on Sun Jan 11, 2009 2:36 pm, edited 1 time in total.
-
- Posts: 1
- Joined: Fri Dec 19, 2008 4:18 am
- Location: Melbourne, Australia
perfectblue,
are you sure that you only need to modify the two files AcAdaptersInfo.dll and Acon.dll?
My Sierra Wireless MC8775 in my X300 shows the HardwareID
SWMUXBUS\SW_NET_0_VID_03f0&PID_1e1d
and I have made the following changes:
1199 to 03f0 and 6813 to 1e1d
with the result that pressing the FnF5 did not produce any result and - even the blue ThinkVantage Button did not light up anymore and pressing it had no effect.
Or do you also have to modify TpFnF5 and AcFnF5 as well??
Would you be able to send me your modified files?
Thanks.
Cheers
are you sure that you only need to modify the two files AcAdaptersInfo.dll and Acon.dll?
My Sierra Wireless MC8775 in my X300 shows the HardwareID
SWMUXBUS\SW_NET_0_VID_03f0&PID_1e1d
and I have made the following changes:
1199 to 03f0 and 6813 to 1e1d
with the result that pressing the FnF5 did not produce any result and - even the blue ThinkVantage Button did not light up anymore and pressing it had no effect.
Or do you also have to modify TpFnF5 and AcFnF5 as well??
Would you be able to send me your modified files?
Thanks.
Cheers
KCA
-
- Posts: 17
- Joined: Sat May 03, 2008 4:52 pm
- Location: Taipei, Taiwan
klaus.albert:
Modifying the two .dll files had always been what needed to be done for AC to recognize MC8775.
1. If you're NOT using AC, then it's the TpFnF5.exe file that needs modifying, not the two .dll files.
2. If you ARE using AC, then the two .dll files needs to be modified and replaced with the originals, works on AC v4.52 and v5.02 so far.
I've had success on both x61 and x300 and other ppl had confirmed success on their T61 as well.
Modifying the two .dll files had always been what needed to be done for AC to recognize MC8775.
1. If you're NOT using AC, then it's the TpFnF5.exe file that needs modifying, not the two .dll files.
2. If you ARE using AC, then the two .dll files needs to be modified and replaced with the originals, works on AC v4.52 and v5.02 so far.
I've had success on both x61 and x300 and other ppl had confirmed success on their T61 as well.
Re: x300 with WWAN mc8775
Maybe I'm wrong, but this isnt working with AC 5.12 on my X300
The card is recognized by AC, but any connection finish with error 58, unsupported WAN card.
Theres some other files with unicode 6813 string (VID/PID) inside, even I changed this files, its not working.
The card is recognized by AC, but any connection finish with error 58, unsupported WAN card.
Theres some other files with unicode 6813 string (VID/PID) inside, even I changed this files, its not working.
-
- Posts: 12
- Joined: Fri Jan 09, 2009 1:43 am
- Location: Oakland, CA
Re: x300 with WWAN mc8775
I have the same problem as skdd with AC 5.12 after modifying my .dll files. Access Connections recognizes the HP MC8775 card, but it says error 58 and will not power on.
I can use the Sierra 3G watcher program, but I don't like it because it launches the watcher box every time I wake from sleep. Any ideas how to get AC to work? Maybe I need an older version (v.5.02)?
I can use the Sierra 3G watcher program, but I don't like it because it launches the watcher box every time I wake from sleep. Any ideas how to get AC to work? Maybe I need an older version (v.5.02)?
Re: x300 with WWAN mc8775
is there any way to flash original firmware/IDs from 42T0931 card into HP 2300 card? I think this is the best solution fot "our" problem.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
P1 5th gen - Swapping keyboard with WWan antenna for keyboard without Wwan. Possible?
by Phidelio » Mon Jan 15, 2024 9:21 am » in ThinkPad P1/P40/P50/P70 and later Series - 1 Replies
- 1811 Views
-
Last post by H-Atkinson
Fri Jan 19, 2024 2:56 pm
-
-
-
1 or 2 X1 Extreme's for sale plus S30 and X300's
by BillMorrow » Sat Nov 25, 2023 5:15 pm » in Marketplace - Forum Members only - 8 Replies
- 2267 Views
-
Last post by BillMorrow
Mon Dec 04, 2023 4:56 am
-
-
-
X230 - what SSD will best fit in the WWAN slot?
by br1anstorm » Tue Nov 14, 2023 3:59 pm » in ThinkPad X230-X280 / X390 Series - 15 Replies
- 5215 Views
-
Last post by br1anstorm
Wed Nov 15, 2023 6:17 pm
-
-
-
WWAN 4g / LTE card for T420
by koden » Fri Dec 22, 2023 8:24 am » in ThinkPad T400/T410/T420 and T500/T510/T520 Series - 0 Replies
- 1175 Views
-
Last post by koden
Fri Dec 22, 2023 8:24 am
-
Who is online
Users browsing this forum: No registered users and 75 guests