For Intellistation M Pro: I could really use the part number for the blue plastic U-shaped hard drive sled, the one with the built-in studs that just snaps around the drive. I've been through every HMM I have for the M Pro series, and I can't find any reference to it.

Anyone?

Thanks much.

Is it this one -
http://cgi.ebay.com/IBM-Hard-Drive-Rail ... 0692733844
or this one?
http://cgi.ebay.com/IBM-INTELLISTATION- ... 0609937076

If it's the latter, it looks like the PN is 00N3275, and that UK seller does ship to the US.

Neither one, at least from what I can tell from the photographs.

The tray I currently have, though broken, is one-piece, U-shaped, and has four little rubber grommets fix-mounted in its sides, with studs poking out of said grommets to engage the holes in the drive.

It is SOMEWHAT similar in appearance to the 2LB09-01 caddy, as used in NetVista systems, although its rails are slimmer (in the vertical sense).

I believe it's the same caddy used in ThinkCentre M52's as well.

Thanks much.

The M52 parts manual lists the part as Toolless hard drive tray. FRU# 03R0302



http://cgi.ebay.com/Refurb-Gr-IBM-03R03 ... 35ad731456

http://www-307.ibm.com/pc/support/site. ... MIGR-60453

for the OP: how did you resolve this? i'm looking for a couple of caddies but the prices are scary!

[quote="kc7gr"]For Intellistation M Pro: I could really use the part number for the blue plastic U-shaped hard drive sled, the one with the built-in studs that just snaps around the drive. I've been through every HMM I have for the M Pro series, and I can't find any reference to it.

The caddies and single-rail inserts do basically the same function - secure the drive in the cage. Caddies snap in, rails screw on. I have used both in my M-Pros.

If you still need these, get in touch with me. I have a surplus of the rails, and can send you a few pairs.

Mike