Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message

T61 and T400 motherboard compatibility ?

T60/T61 Series
Post Reply
Message
Author
alitahriki
Posts: 40
Joined: Sat May 14, 2011 5:33 am
Location: istanbul/turkey

T61 and T400 motherboard compatibility ?

#1 Post by alitahriki » Fri Feb 24, 2012 8:12 am

hello everyone. i have and t61 and a t400 both are same size.
what i want is put t400's motherboard to t61 and t61's to t400. and both of them must survive after this operation.
any ideas ?

Raceboy
Senior Member
Senior Member
Posts: 780
Joined: Sun Feb 10, 2008 7:17 am
Location: Tartu, Estonia

Re: T61 and T400 motherboard compatibility ?

#2 Post by Raceboy » Fri Feb 24, 2012 9:00 am

I have wondered about this before myself as several parts are interchangeable (palmrest, keyboard bezel etc).

You should take the laptops apart and compare the boards :)
X61s:L7500,4GB,128GB SSD,IPS
X32s:PM 758 LV CPU mod,2GB,64GB microSATA SSD,COM mod,IPS
701c,240,380,X60s,560X,570E,600/E,T20,T21,T30,TR451,T42p
Past:560/E/Z,600E,R30,T21,T23,T30,T40,TR451,T40p,T41,T41p,T42,T42p,T43,X20,X22,X23,X24,X31,X40,X41,X60/T,X61/s,X201,T60,T60p,T61,T400,T601p

Easy Wind
Junior Member
Junior Member
Posts: 354
Joined: Fri Sep 24, 2010 10:32 am
Location: Twin Cities, MN

Re: T61 and T400 motherboard compatibility ?

#3 Post by Easy Wind » Fri Feb 24, 2012 12:49 pm

while I don't know the answer for sure, but a question that comes to mind is "why" do you want to do this?

edit to add:
just checked and a T61 MB and structure frame seem to fit in a T400 bottom panel and vice versa
T42 (type 2373)
T43 (type 2668) x2
T60 (type 2007)

TuuS
Senior ThinkPadder
Senior ThinkPadder
Posts: 2090
Joined: Thu Sep 22, 2011 2:41 pm
Location: Hockessin, Delaware

Re: T61 and T400 motherboard compatibility ?

#4 Post by TuuS » Sun Feb 26, 2012 1:03 am

I had both side by side and they looked totally different. If you remove the palmrest and keyboard, they don't look anything alike, plus the T400 uses sata ultrabay drive, not even the drives are interchangeable.

I could be wrong, but I don't think you'll have any chance at frankenpadding these two machines, and from what I understand the palmrest isn't event he same, one of the "stand-offs" is a different length, and I know for sure the harddrive covers do not interchange. You can swap keyboards, harddrives and batteries, but not much more.

If you do somehow manage to get one installed, you'll need to replace your optical drive and your ram at least.

Raceboy
Senior Member
Senior Member
Posts: 780
Joined: Sun Feb 10, 2008 7:17 am
Location: Tartu, Estonia

Re: T61 and T400 motherboard compatibility ?

#5 Post by Raceboy » Sun Feb 26, 2012 3:03 am

I have personally used T61 palmrest on T400 and even though the threaded mount of one screw had to be filed down a bit, it worked perfectly. T61 has a bit smaller touchpad also.
X61s:L7500,4GB,128GB SSD,IPS
X32s:PM 758 LV CPU mod,2GB,64GB microSATA SSD,COM mod,IPS
701c,240,380,X60s,560X,570E,600/E,T20,T21,T30,TR451,T42p
Past:560/E/Z,600E,R30,T21,T23,T30,T40,TR451,T40p,T41,T41p,T42,T42p,T43,X20,X22,X23,X24,X31,X40,X41,X60/T,X61/s,X201,T60,T60p,T61,T400,T601p

Monck
Freshman Member
Posts: 65
Joined: Fri Feb 05, 2010 8:48 am
Location: Warsaw, Poland

Re: T61 and T400 motherboard compatibility ?

#6 Post by Monck » Sun Feb 26, 2012 7:32 am

Take a look on miniPCI where you put WIFI it's in different place

I try to do this but it's imposible (but of cours you can cut frame and maybe it will fit.
In Poland 40km isn't distance, -40degree isn't cold, 40% alcohol isn't vodka
-
T530-me, T400 -Wife, X61s - sold, T42 - mom, R30 - second mom, T61 - waiting for better times
-

richk
Moderator
Moderator
Posts: 2913
Joined: Sun Jan 01, 2006 3:29 pm
Location: San Francisco, CA

Re: T61 and T400 motherboard compatibility ?

#7 Post by richk » Sun Feb 26, 2012 11:57 am

There is a basic problem. The LCD connector is different

TuuS
Senior ThinkPadder
Senior ThinkPadder
Posts: 2090
Joined: Thu Sep 22, 2011 2:41 pm
Location: Hockessin, Delaware

Re: T61 and T400 motherboard compatibility ?

#8 Post by TuuS » Sun Feb 26, 2012 4:57 pm

Raceboy wrote:I have personally used T61 palmrest on T400 and even though the threaded mount of one screw had to be filed down a bit, it worked perfectly. T61 has a bit smaller touchpad also.
Yes, I'm aware of the longer "stand off" on one of them. Shortening it to make it fit is an option, but swapping the other direction would require lengthening it, or removing it altogether. Leaving it without a screw should be avoided because if someone ever did install a screw, it would likely break the part. I believe it was richk that alerted me to this.

I do know you can swap LCD screens, assuming the T400 isn't led backlit, and it might be possible to use a t400 cable in your t61 lid to get past the systemboard connector problem, but unless you have a pile of parts and want to do this for entertainment, I suggest it's a very bad idea.

However, we'd all love to know if it can be done.

ps. considering I just sold a really nice high-end t400 for less then $300, I can it worth all this effort to end up with something less then a t400 in the end. If there was some unique objective to achieve, then I'd say go for it, but if you're only trying to fix a dead system board, then I'd just get a t61 intel board and be done with it.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T60/T61 Series”

Who is online

Users browsing this forum: No registered users and 55 guests