Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message

10.6.0 Installed but bootloader CD does not see the HDD

OS-X on ThinkPads
Post Reply
Message
Author
RistoE
Posts: 49
Joined: Sat Feb 20, 2010 9:06 am
Location: Espoo, Finland

10.6.0 Installed but bootloader CD does not see the HDD

#1 Post by RistoE » Sun Feb 26, 2012 12:59 pm

Hi,

I've been trying to find help but it is so difficult.

My Thinkpad T60 (1951-A47) has C2D with GMA945.
It took me long time to figure out that for me the right way to install OSX (SL 10.6.0 vanilla DVD) was:

- Change from ACHI to Compatibility (odd)
- run install with -x

I have installed SL to 2 different drives (both are 60GB).
I basically followed sebinouse notes from this forum and step 2 from http://tonymacx86.blogspot.com/2010/04/ ... -x-on.html as sebinouse adviced.
Installation is successfull but;
- after the install the disk with SL is not seen by IBoot bootloader CD
- I'm not able to do the fist boot to OSX

so step 17 failed ("When you get to the boot selection screen, choose your new Snow Leopard installation")

Snow Leopard and EFI partitions are there. My linux sees the SL partition and I can see that folders and files exists. But my bootloader(s) do not see the HD. I have tried both ACHI and Compatibility mode. Nothing seems to help. I can't find any advice. I'm getting crazy because I can't understand what I'm missing. Has anybody seen anything like this?

I've also tried to attach the SL disk thru USB and multibay but that does not help. Bootloader sees my Linux/Win7 but no way to get the SL disk been seen.

I will add what bootloaders I have tried and will report:
1. BootCD_MacPNT (2010 11 22 - BootCD_MacPNT.iso) from Sebinouse
2. iboot-320-tonymacx86com from tonymacx86 Forum
3. rBoor-LE ver. 2012-02-02

BootCD_MacPNT is not able to install OSX with any combination
iboot-320 installs with -x switch
rBoor-LE sees other drives but not my disk with SL
600E (P3-850Mhz), 3*T60 (3*T7200), T400 (8600Mhz/8GB/SSD120GB), T420 (4180-CA3 with Samsung 850 mSATA 250GB), T440p (i7-4702MQ with Samsung 870EVO 1TB)

RistoE
Posts: 49
Joined: Sat Feb 20, 2010 9:06 am
Location: Espoo, Finland

Re: 10.6.0 Installed but bootloader CD does not see the HDD

#2 Post by RistoE » Mon Feb 27, 2012 2:10 pm

Further information: My SL partition size is only 2.9GB. I believe it is too small. I wonder why?
600E (P3-850Mhz), 3*T60 (3*T7200), T400 (8600Mhz/8GB/SSD120GB), T420 (4180-CA3 with Samsung 850 mSATA 250GB), T440p (i7-4702MQ with Samsung 870EVO 1TB)

RistoE
Posts: 49
Joined: Sat Feb 20, 2010 9:06 am
Location: Espoo, Finland

Re: 10.6.0 Installed but bootloader CD does not see the HDD

#3 Post by RistoE » Thu Mar 01, 2012 2:11 am

Solved: The OSX disk (DVD) was damaged (scrached) and running the install with -x flag meant that OSX reported that the install was successfull even it was not.

With some help I now have the DVD image installed to a hd partition and now the bootloader stars install from hd. I was able to start OSX after install but for me;

- SATA setting need to be set as "compatibility"
- use "-x"

Soon I start reading how to install kexts, I am novice with OSX.
600E (P3-850Mhz), 3*T60 (3*T7200), T400 (8600Mhz/8GB/SSD120GB), T420 (4180-CA3 with Samsung 850 mSATA 250GB), T440p (i7-4702MQ with Samsung 870EVO 1TB)

RistoE
Posts: 49
Joined: Sat Feb 20, 2010 9:06 am
Location: Espoo, Finland

Re: 10.6.0 Installed but bootloader CD does not see the HDD

#4 Post by RistoE » Sat Mar 03, 2012 10:05 am

:banana:

I have now working 10.6.0 installed on a USB drive.
Everything seems to work or at least I don't know yet what doesn't.

Thank's go mainly to this forum and Chimera boot loader.

It took me some time to understand all the instructions but the end result looks quite good.
600E (P3-850Mhz), 3*T60 (3*T7200), T400 (8600Mhz/8GB/SSD120GB), T420 (4180-CA3 with Samsung 850 mSATA 250GB), T440p (i7-4702MQ with Samsung 870EVO 1TB)

sumpm1
Posts: 6
Joined: Wed May 01, 2013 1:01 am
Location: El Paso, TX

Re: 10.6.0 Installed but bootloader CD does not see the HDD

#5 Post by sumpm1 » Thu May 23, 2013 5:17 pm

RistoE wrote:With some help I now have the DVD image installed to a hd partition and now the bootloader stars install from hd. I was able to start OSX after install but for me;
Yes. Where did you find help to put the DVD image onto a partition from ubuntu?

RistoE
Posts: 49
Joined: Sat Feb 20, 2010 9:06 am
Location: Espoo, Finland

Re: 10.6.0 Installed but bootloader CD does not see the HDD

#6 Post by RistoE » Sat May 25, 2013 2:09 am

sumpm1 wrote:Where did you find help to put the DVD image onto a partition from ubuntu?
There was no step to step instructions. I believe this is what I did
1. prepare a drive with a few HSF partitions (or HSF+ not sure) with Gparted I think.
2. mounting of the HSF partition with write access is needed. This may be of help: http://superuser.com/questions/84446/ho ... read-write
3. wrote the DMG file content to a HSF partition (not sure how, however. Maybe with 7z)
4. start pc with bootloader CD which is now able to see the content of the "DVD"
5. start install (needs another HSF partition)
Otherwise I tried to follow instructions already documented to this site

The OSX install can add journaling to OSX partition (HSF -> HSF+)
This was finally quite easy, therefore I don't remember too well. My main problems was related to reading the OSX DVD but I was also messing with BIOS SATA drive settings some how. :oops:

EDIT
this is very interesting: The OSX hd was in the T-60 when I ran Ubuntu update. Seems that grub (Unbuntu bootloader) was upgraded and it recognized 4 MAC OS X instances on the 2 logical drives. It shows two (64-bit) and other two (32-bit) versions. So, I tried to run the very first 64 bit version and the OS booted up. However, keybord and pointing stick were not working. I was able surf in the net with external mouse. This kind of setup would be very nice!
600E (P3-850Mhz), 3*T60 (3*T7200), T400 (8600Mhz/8GB/SSD120GB), T420 (4180-CA3 with Samsung 850 mSATA 250GB), T440p (i7-4702MQ with Samsung 870EVO 1TB)

sumpm1
Posts: 6
Joined: Wed May 01, 2013 1:01 am
Location: El Paso, TX

Re: 10.6.0 Installed but bootloader CD does not see the HDD

#7 Post by sumpm1 » Sat May 25, 2013 10:59 am

3. wrote the DMG file content to a HSF partition (not sure how, however. Maybe with 7z)
Yeah this is the part I don't understand. Does the:

1. DMG file just need to EXIST as a .dmg file on that new hsf partition?
2. Or do I just need to extract the contents of the dmg over to that drive?
3. Or do I need to image the hsf partition with the dmg ?

Thank you for the help, and sorry for so many questions!

RistoE
Posts: 49
Joined: Sat Feb 20, 2010 9:06 am
Location: Espoo, Finland

Re: 10.6.0 Installed but bootloader CD does not see the HDD

#8 Post by RistoE » Sat May 25, 2013 12:15 pm

Looking the drive where the install DVD is (with Ubuntu); it is just ordinary disk with folders [Applications, bin, dev, Install Mac OS X.app, Instructions.localized, Library, Optinal Installs.localized, private, sbin, System, usr, Volumes, etc, tmp, var] and a file [mach_kernel]. The drive name is "Mac OS X Install DVD".

I believe I just extracted the contents to a HSF drive :
sumpm1 wrote:2. Or do I just need to extract the contents of the dmg over to that drive?
I don't remember which extractor program I used but seems that atleast 7-zip is able to do that (7z is the name in Ubuntu). I have used that for other purposes also.
600E (P3-850Mhz), 3*T60 (3*T7200), T400 (8600Mhz/8GB/SSD120GB), T420 (4180-CA3 with Samsung 850 mSATA 250GB), T440p (i7-4702MQ with Samsung 870EVO 1TB)

RistoE
Posts: 49
Joined: Sat Feb 20, 2010 9:06 am
Location: Espoo, Finland

Re: 10.6.0 Installed but bootloader CD does not see the HDD

#9 Post by RistoE » Sun May 26, 2013 11:33 am

:D I did not think that I could use my standard GRUB menu to start Ubuntu, W7 or OSX. It seems to work fairly nicely, however.

Only major problem with my installation is that on 64-bit OSX 10.6.6 the thinkpad own keyboard is not functional. On 32-bit version it works but on that side the wlan does not work. Trackpad works on both. I've been reading lots of guides but can't figure what is causing this. Any guidance would be respected. :help:

dmesg..

acPNT. X60T error - CFBundleVersion bad value '10.6.5.1'.
Kext com.MacPNT. X60T error - CFBundleVersion bad value '10.6.5.1'.
AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
calling mpo_policy_init for Sandbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine policy (Quarantine)
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.

MAC Framework successfully initialized
using 15728 buffer headers and 4096 cluster IO buffer headers
Unsynchronized TSC for cpu 1: 0x0000000ea6df5750, delta 0x96e34
IOAPIC: Version 0x20 Vectors 64:87
Current tsc from rdtsc64() is 62992376976. Rendezvouing..
VoodooTSCSyn::doTsc(): stamp_tsc was called: 2 times
ACPI: System State [S0 S3 S4 S5] (S3)
AppleIntelCPUPowerManagement: initialization complete
RTC: Only single RAM bank (128 bytes)
Kext com.abstractwankery.driver.TabletEnabler - library kext com.apple.kernel.iokit not found.
Can't load kext com.abstractwankery.driver.TabletEnabler - failed to resolve library dependencies.
Kext com.abstractwankery.driver.TabletEnabler failed to load (0xdc00800e).
Failed to load kext com.abstractwankery.driver.TabletEnabler (error 0xdc00800e).
mbinit: done (64 MB memory set for mbuf pool)
From path: "uuid",
Waiting for boot volume with UUID AFA44D04-1697-30D8-BD45-A180C8ED3F2B
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Couldn't alloc class "com_abstractwankery_driver_tabletenabler"
netkas presents fakesmc, a kext which emulates smc device
com.apple.AppleFSCompressionTypeZlib kmod start
com.apple.AppleFSCompressionTypeZlib load succeeded
AppleIntelCPUPowerManagementClient: ready
Kext org.voodoo.driver.VoodooHDA - library kext com.apple.iokit.IOAudioFamily not found.
Can't load kext org.voodoo.driver.VoodooHDA - failed to resolve library dependencies.
Kext org.voodoo.driver.VoodooHDA failed to load (0xdc00800e).
Failed to load kext org.voodoo.driver.VoodooHDA (error 0xdc00800e).
Not loading kext com.apple.driver.AirPort.Atheros - not found and kextd not available in early boot.
Not loading kext com.apple.driver.AirPort.Atheros - not found and kextd not available in early boot.
Kext cn.sh.fang.ThinkpadUltraNav - library kext com.apple.kernel.libkern not found.
Can't load kext cn.sh.fang.ThinkpadUltraNav - failed to resolve library dependencies.
Kext cn.sh.fang.ThinkpadUltraNav failed to load (0xdc00800e).
Failed to load kext cn.sh.fang.ThinkpadUltraNav (error 0xdc00800e).
Couldn't alloc class "VoodooHDADevice"
Couldn't alloc class "ThinkpadUltraNav"
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IDE0@1F,1/AppleIntelPIIXATARoot/PRIM@0/AppleIntelPIIXPATA/ATADeviceNub@0/AppleATADiskDriver/IOATABlockStorageDevice/IOBlockStorageDriver/HTS541060G9SA00 HTS541060G9SA00/IOGUIDPartitionScheme/Snow Leopard@2
BSD root: disk1s2, major 14, minor 7
Kernel is LP64
AppleIntel8254XEthernet: Ethernet address 00:16:41:58:10:16
systemShutdown false
Waiting for DSMOS...
Previous Shutdown Cause: 0
Atheros: mac 10.3 phy 6.1 radio 10.2
AirPort_AthrFusion21: Ethernet address 00:16:cf:00:08:73
IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
AirPort: Link Down on en1. Reason 1 (Unspecified).
en1: 802.11d country code set to 'FR'.
en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
VoodooHDADevice[0xffffff803855e000]::init
TIMEOUT numcmd=1, sent=1, received=0
TIMEOUT numcmd=1, sent=1, received=0
error: codec #1 is not responding, probing aborted
AirPort: Link Up on en1
AirPort: RSN handshake complete on en1
NTFS driver 3.3 [Flags: R/W].
NTFS volume name System Reserved, version 3.1.
DSMOS has arrived
NTFS volume name , version 3.1.
display: Not usable
600E (P3-850Mhz), 3*T60 (3*T7200), T400 (8600Mhz/8GB/SSD120GB), T420 (4180-CA3 with Samsung 850 mSATA 250GB), T440p (i7-4702MQ with Samsung 870EVO 1TB)

RistoE
Posts: 49
Joined: Sat Feb 20, 2010 9:06 am
Location: Espoo, Finland

Re: 10.6.0 Installed but bootloader CD does not see the HDD

#10 Post by RistoE » Mon May 27, 2013 11:36 am

I updated VoodooHDA to version 2.8.2, less errors now but still no keyboard (using onscreen kbd).
Next I should to do something to this(?):

X60T error - CFBundleVersion bad value '10.6.5.1'

npvhash=4095
Darwin Kernel Version 10.6.0: Wed Nov 10 18:11:58 PST 2010; root:xnu-1504.9.26~3/RELEASE_X86_64
vm_page_bootstrap: 758169 free pages and 28263 wired pages
kext submap [0xffffff7f80600000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000600000]
standard timeslicing quantum is 10000 us
mig_table_max_displ = 73
Kext com.MacPNT. X60T error - CFBundleVersion bad value '10.6.5.1'.
Kext com.MacPNT. X60T error - CFBundleVersion bad value '10.6.5.1'.
AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
calling mpo_policy_init for Sandbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine policy (Quarantine)
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.

MAC Framework successfully initialized
using 15728 buffer headers and 4096 cluster IO buffer headers
Unsynchronized TSC for cpu 1: 0x0000000de1e01e00, delta 0x96f30
IOAPIC: Version 0x20 Vectors 64:87
Current tsc from rdtsc64() is 59685310056. Rendezvouing..
VoodooTSCSyn::doTsc(): stamp_tsc was called: 2 times
ACPI: System State [S0 S3 S4 S5] (S3)
AppleIntelCPUPowerManagement: initialization complete
RTC: Only single RAM bank (128 bytes)
Kext com.abstractwankery.driver.TabletEnabler - library kext com.apple.kernel.iokit not found.
Can't load kext com.abstractwankery.driver.TabletEnabler - failed to resolve library dependencies.
Kext com.abstractwankery.driver.TabletEnabler failed to load (0xdc00800e).
Failed to load kext com.abstractwankery.driver.TabletEnabler (error 0xdc00800e).
mbinit: done (64 MB memory set for mbuf pool)
From path: "uuid",
Waiting for boot volume with UUID AFA44D04-1697-30D8-BD45-A180C8ED3F2B
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Couldn't alloc class "com_abstractwankery_driver_tabletenabler"
netkas presents fakesmc, a kext which emulates smc device
Not loading kext com.apple.driver.AirPort.Atheros - not found and kextd not available in early boot.
com.apple.AppleFSCompressionTypeZlib kmod start
com.apple.AppleFSCompressionTypeZlib load succeeded
AppleIntelCPUPowerManagementClient: ready
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IDE0@1F,1/AppleIntelPIIXATARoot/PRIM@0/AppleIntelPIIXPATA/ATADeviceNub@0/AppleATADiskDriver/IOATABlockStorageDevice/IOBlockStorageDriver/HTS541060G9SA00 HTS541060G9SA00/IOGUIDPartitionScheme/Snow Leopard@2
BSD root: disk1s2, major 14, minor 9
Kernel is LP64
Waiting for DSMOS...
AppleIntel8254XEthernet: Ethernet address 00:16:41:58:10:16
systemShutdown false
Previous Shutdown Cause: 0
Controller: Intel 82801G (vendor ID: 8086, device ID: 27d8)
Recsel fails src=010001c0 oss=00000200
Recsel fails src=010001c0 oss=00000000
Recsel fails src=010001c0 oss=00000200
TIMEOUT numcmd=1, sent=1, received=0
TIMEOUT numcmd=1, sent=1, received=0
error: codec #1 is not responding, probing aborted
Atheros: mac 10.3 phy 6.1 radio 10.2
AirPort_AthrFusion21: Ethernet address 00:16:cf:00:08:73
IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
AirPort: Link Down on en1. Reason 1 (Unspecified).
en1: 802.11d country code set to 'US'.
en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 149 153 157 161 165
AirPort: Link Up on en1
AirPort: RSN handshake complete on en1
DSMOS has arrived
NTFS driver 3.3 [Flags: R/W].
NTFS volume name System Reserved, version 3.1.
NTFS volume name , version 3.1.
display: Not usable
AirPort: RSN handshake complete on en1
AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
600E (P3-850Mhz), 3*T60 (3*T7200), T400 (8600Mhz/8GB/SSD120GB), T420 (4180-CA3 with Samsung 850 mSATA 250GB), T440p (i7-4702MQ with Samsung 870EVO 1TB)

RistoE
Posts: 49
Joined: Sat Feb 20, 2010 9:06 am
Location: Espoo, Finland

Re: 10.6.0 Installed but bootloader CD does not see the HDD

#11 Post by RistoE » Tue May 28, 2013 2:43 pm

I deleted VoodooPS2Controller.kext and now using kexts from TRACKPAD.SYNAPTIC-GESTURE.zip.
Now seems that that only trackpad is not functional. (Using USB mouse now). Everything else seems to work.(I've never learned to use touchpad which I keep disabled).

Still seeing that boot tries to load VoodooPS2Controller and X60T version error.

Good to see progress anyway. Once I have learned more I may try newer OSX versions.

EDIT: Screen resolution is 1280*1024 but it should be 1400*1050, well...
600E (P3-850Mhz), 3*T60 (3*T7200), T400 (8600Mhz/8GB/SSD120GB), T420 (4180-CA3 with Samsung 850 mSATA 250GB), T440p (i7-4702MQ with Samsung 870EVO 1TB)

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “OS-X Questions”

Who is online

Users browsing this forum: No registered users and 49 guests