Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
Need a picture from a part of a X31 motherboard
Need a picture from a part of a X31 motherboard
Hey all,
I got my hands on a very good condition X31. However apparently as a result of a failed PLL mod one of the legs on the CY28346ZI-2 is cut off (S1 if my memory serves well). Therefore the system forced on running at 66MHz FSB resulting in a max cpu speed of 1000MHz. I managed to mend the broken leg by soldering a piece of a copper (had to carve the casing of CY28346ZI-2, but the system seems to work now).
However the system seems to be missing at least one SMD resistor and I can't seem to find a good picture of the clock generator area in the web (the area below the keyboard, i think its the modem card). There is some solder residue and it seems there has been some resistors in there at some point of the machines life. I have a good idea of the values of the resistors, propably 5k or 10k (they are pull-up / pull-down resistors so the actual value isn't that relevant.). Could some kind person take a photo of the area so I can find out which resistors are missing (if any) from my motherboard.
I just want to know which resistors should be there and if the residues are a result of some overclocking experiment or if there really should be some SMD components there.
Thanks in advance,
-Obic
I got my hands on a very good condition X31. However apparently as a result of a failed PLL mod one of the legs on the CY28346ZI-2 is cut off (S1 if my memory serves well). Therefore the system forced on running at 66MHz FSB resulting in a max cpu speed of 1000MHz. I managed to mend the broken leg by soldering a piece of a copper (had to carve the casing of CY28346ZI-2, but the system seems to work now).
However the system seems to be missing at least one SMD resistor and I can't seem to find a good picture of the clock generator area in the web (the area below the keyboard, i think its the modem card). There is some solder residue and it seems there has been some resistors in there at some point of the machines life. I have a good idea of the values of the resistors, propably 5k or 10k (they are pull-up / pull-down resistors so the actual value isn't that relevant.). Could some kind person take a photo of the area so I can find out which resistors are missing (if any) from my motherboard.
I just want to know which resistors should be there and if the residues are a result of some overclocking experiment or if there really should be some SMD components there.
Thanks in advance,
-Obic
TP 600X 650MHz / 576Mt / 80GB
TP T42 1.7GHz Dothan / 2048MB / 80GB / SXGA / Radeon 9600 64MB
TP T61 T7700 / 4096MB / 500GB / Nvidia NVS 140M
HP TC4400 / T7200 / 2048MB / 160GB
TP T42 1.7GHz Dothan / 2048MB / 80GB / SXGA / Radeon 9600 64MB
TP T61 T7700 / 4096MB / 500GB / Nvidia NVS 140M
HP TC4400 / T7200 / 2048MB / 160GB
Re: Need a picture from a part of a X31 motherboard
I can take a photo of the PLL clock generator area tomorrow.
X61s:L7500,4GB,128GB SSD,IPS
X32s:PM 758 LV CPU mod,2GB,64GB microSATA SSD,COM mod,IPS
701c,240,380,X60s,560X,570E,600/E,T20,T21,T30,TR451,T42p
Past:560/E/Z,600E,R30,T21,T23,T30,T40,TR451,T40p,T41,T41p,T42,T42p,T43,X20,X22,X23,X24,X31,X40,X41,X60/T,X61/s,X201,T60,T60p,T61,T400,T601p
X32s:PM 758 LV CPU mod,2GB,64GB microSATA SSD,COM mod,IPS
701c,240,380,X60s,560X,570E,600/E,T20,T21,T30,TR451,T42p
Past:560/E/Z,600E,R30,T21,T23,T30,T40,TR451,T40p,T41,T41p,T42,T42p,T43,X20,X22,X23,X24,X31,X40,X41,X60/T,X61/s,X201,T60,T60p,T61,T400,T601p
Re: Need a picture from a part of a X31 motherboard
Raceboy wrote:I can take a photo of the PLL clock generator area tomorrow.
Thank you very much
TP 600X 650MHz / 576Mt / 80GB
TP T42 1.7GHz Dothan / 2048MB / 80GB / SXGA / Radeon 9600 64MB
TP T61 T7700 / 4096MB / 500GB / Nvidia NVS 140M
HP TC4400 / T7200 / 2048MB / 160GB
TP T42 1.7GHz Dothan / 2048MB / 80GB / SXGA / Radeon 9600 64MB
TP T61 T7700 / 4096MB / 500GB / Nvidia NVS 140M
HP TC4400 / T7200 / 2048MB / 160GB
Re: Need a picture from a part of a X31 motherboard
Here's the link to the photo: http://www.porsche-foorum.org/album/alb ... 31_PLL.jpg
I hope the quality of the Nokia E75 is enough
I hope the quality of the Nokia E75 is enough
X61s:L7500,4GB,128GB SSD,IPS
X32s:PM 758 LV CPU mod,2GB,64GB microSATA SSD,COM mod,IPS
701c,240,380,X60s,560X,570E,600/E,T20,T21,T30,TR451,T42p
Past:560/E/Z,600E,R30,T21,T23,T30,T40,TR451,T40p,T41,T41p,T42,T42p,T43,X20,X22,X23,X24,X31,X40,X41,X60/T,X61/s,X201,T60,T60p,T61,T400,T601p
X32s:PM 758 LV CPU mod,2GB,64GB microSATA SSD,COM mod,IPS
701c,240,380,X60s,560X,570E,600/E,T20,T21,T30,TR451,T42p
Past:560/E/Z,600E,R30,T21,T23,T30,T40,TR451,T40p,T41,T41p,T42,T42p,T43,X20,X22,X23,X24,X31,X40,X41,X60/T,X61/s,X201,T60,T60p,T61,T400,T601p
Re: Need a picture from a part of a X31 motherboard
Thats more than enough. Apparently I'm only missing one SMD resistor. Aitäh!Raceboy wrote:Here's the link to the photo: http://www.porsche-foorum.org/album/alb ... 31_PLL.jpg
I hope the quality of the Nokia E75 is enough
TP 600X 650MHz / 576Mt / 80GB
TP T42 1.7GHz Dothan / 2048MB / 80GB / SXGA / Radeon 9600 64MB
TP T61 T7700 / 4096MB / 500GB / Nvidia NVS 140M
HP TC4400 / T7200 / 2048MB / 160GB
TP T42 1.7GHz Dothan / 2048MB / 80GB / SXGA / Radeon 9600 64MB
TP T61 T7700 / 4096MB / 500GB / Nvidia NVS 140M
HP TC4400 / T7200 / 2048MB / 160GB
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3 Replies
- 677 Views
-
Last post by kfzhu1229
Fri Mar 29, 2024 11:27 pm
-
-
FS: 128GB NVME 2242 - FRU: 00UP730 (1 picture included)
by coolnose » Fri Mar 08, 2024 8:21 am » in Marketplace - Forum Members only - 0 Replies
- 232 Views
-
Last post by coolnose
Fri Mar 08, 2024 8:21 am
-
-
-
3 Thinkpad X31: (1) 1,6GHz, 2Gb Ram, 40Gb hdd + (2) x31 for Spare Parts + Power AC + Docking for Sale!!
by N4b00 » Mon Dec 25, 2023 7:50 am » in Marketplace - Forum Members only - 3 Replies
- 2377 Views
-
Last post by N4b00
Thu Apr 11, 2024 6:42 am
-
-
-
is it a design flaw for power switch to be part of keyboard?
by thisway » Fri Dec 29, 2023 11:06 am » in ThinkPad T400/T410/T420 and T500/T510/T520 Series - 2 Replies
- 18249 Views
-
Last post by dr_st
Sat Dec 30, 2023 6:31 am
-
Who is online
Users browsing this forum: No registered users and 25 guests