Please note that the prices DO NOT include shipping unless otherwise stated...

CPUs:

1) Intel SL9EH Core Duo T2500, 2.00Ghz/2MB/667 Mhz Yonah - $15

http://ark.intel.com/products/27236/Int ... 67-MHz-FSB)

2) Intel SL9JN Core Duo T2600, 2.16GHz/2MB/667 MHz Yonah - $20

http://ark.intel.com/products/27237/Int ... 67-MHz-FSB)

These CPUs works in R60, T60, Z61 series presuming a 945 chipset and not 940. Ask me if you're unsure.

I also have a *ton* of older P4M and Pentium M CPUs, let me know if you need a specific one and I'll search for it...the same applies to older wireless/Bluetooth cards...




motherboards/systemboards/planar cards - call them what you will:

1) T60p motherboard for non-widescreen 4:3 models, various FRUs, ATi FireGL V5250 256MB GPU, fully tested - 70

2) T60p motherboard for non-widescreen 4:3 models, various FRUs, ATi FireGL V5200 256MB GPU, fully tested - $60

3) T60 motherboards for non-widescreen 4:3 models, various FRUs, all with ATi X1300 64MB GPU, fully tested - $35

4) T60 motherboards for non-widescreen 4:3 models, various FRUs, Intel 950 integrated graphics, fully tested - $30


LCDs and LCD assemblies

1) A complete working 14" XGA (1024x768) T4x LCD assembly, very clean and bright screen, very clean lid, everything included. Ships with a clear plate of your choice.$25

2) 15" SXGA+ (1400x1050) IPS FlexView LCDs, LG Philips, FRUs will vary, pulled out of the working T60/p units - $30 and up

3) A complete working 15" UXGA (1600x1200) T4xp LCD assembly, everything included, one small gray spot in the middle section of otherwise very clean and bright IPS FlexView panel, - $50.



misc. items:

1) T4x/R5x series keyboards, 14" models/U.S. English only, price will reflect both the condition and the manufacturer, clean examples overall - from $10 and up



the stuff that I'm looking for, cash or trade:

- Mint or near mint palmrests/keyboard bezels for 15" (4:3) non-widescreen T60/p

- DVD RW multiburner drives for T6x series

- 2GB and 4GB PC2-5300 laptop DIMMs.

I'm more than happy to combine shipping and listen to *reasonable* offers...talk to me...

PM or email me directly to tataslonATaol.com with any questions/concerns

Do you have cadddy + rubber rails for a X61?

Nope, sorry.

am I missing the RAM size on these ?

>LOT "C1": 5 sticks of PC2100 (DDR266) laptop RAM, mostly with FRU #, $25
>LOT "C2": 4 sticks of PC2700 (DDR333) laptop RAM, some with FRU #, $24

All sticks listed are 512MB DIMMs.

the HDD caddy is available most anyplace..
shucks, look at the sponsor bar (above) at newmode's website..
they have them..

thanks, overlooked that apparently!

New items added.

Any 60GB or larger IDE drives?

Not at the moment, I'm sorry to say.

New stuff added and a completely redone post to boot....

I am assuming not, and I'm sure it's covered somewhere on this site, but would this work in a T60 15" (4:3) ?

This would be for a possible future Frankey project

While you could possibly get it to work, it would likely never work as well as the screens originally shipped with T60/p series, but it most definitely would not work "out of the box".

If you're intent on building a Frankie with a SXGA+ IPS panel, this is as good as it gets:

viewtopic.php?f=11&t=105469

d'oh, actually sent you a PM, ignore that really.

But thanks for the info and reminder link of RBS post. I had seen that thread before but was hoping on spending a bit less than that if I could.

Any chance you have a 755 or 765 Pentium-M? And willing to ship to europe?
Cheers

While I'm always happy to ship anything and everything apart from batteries abroad, I have no PM 755 or 765 CPUs to offer at the moment...

Bugger... Ta anyway, mate. Throw a PM my way if you do, will ya?

Do you happen to have a Pentium M 780?

I might come up with one of these, will PM you if I do...

I asked Tuus about this, and he is on the lookout for one, but in the meantime: do you have any LCD inverters for 15" T60 SXGA+ ?
FRU 42T0079, 41W1012 or 39T5658.
I have a XGA T60 and a spare SXGA+ screen, but no inverter to do the conversion

Sorry, no. Could use a couple myself...

Update & bump.

Hi George, I owe you a fiver, and Bump!

Ron

You can temporarily use the XGA inverter.
Its output is just a little bit less than an SXGA+/UXGA inverter's, but at least it's a workable solution till you find the proper inverter.
Swapping out an inverter is a lot easier than the whole LCD panel.
You can also use the 13R1014/13R1015 inverter for SXGA+/UXGA (which is even harder to find) .

Anything pop up yet?

Nope. But it still might...never give up hope, until they shove a lit cigarette in your mouth and start blindfolding you...

Manual bump.

Hi,
Is it possible to fit those in a widescreen 14'' T61 case? (I guess not, but wanna be sure

Thank u

No.

None of the listed T60 boards would fit in a widescreen T61...

Update and bump.