Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
Setting S/N and TYPE on motherboard (need program)!?
Setting S/N and TYPE on motherboard (need program)!?
Hi,
I got my IBM T40 back from service the other day and started to reinstall it. When I installed the new IBM Updatetool it said the computer had an invalid type. Checking the TYPE + SERIAL NUMBER from within Access IBM (blue button while booting) it showed the SERIAL + TYPE NR. was empty!! I know they changed the motherboard.
I then tried to flash it to the newest bios. In the bios program it is possible to set the TYPE - but only the last 3 digits. Now the dealer i bought the computer from want me to send the machine back and i can expect to have it for service for about 2-3 weeks - AGAIN!
Does any of you guys have e floppy disk that can boot up and change the motherboard serial + type ? I know it exists because one of our other laptops came back with the same problem 2-3 months ago and it had a Servicepac agreement so this technician showed up and did the trick.
Thanks,
Christian
I got my IBM T40 back from service the other day and started to reinstall it. When I installed the new IBM Updatetool it said the computer had an invalid type. Checking the TYPE + SERIAL NUMBER from within Access IBM (blue button while booting) it showed the SERIAL + TYPE NR. was empty!! I know they changed the motherboard.
I then tried to flash it to the newest bios. In the bios program it is possible to set the TYPE - but only the last 3 digits. Now the dealer i bought the computer from want me to send the machine back and i can expect to have it for service for about 2-3 weeks - AGAIN!
Does any of you guys have e floppy disk that can boot up and change the motherboard serial + type ? I know it exists because one of our other laptops came back with the same problem 2-3 months ago and it had a Servicepac agreement so this technician showed up and did the trick.
Thanks,
Christian
It's available but ...............
From IBM's site: http://www-307.ibm.com/pc/support/site. ... MIGR-44144
ThinkPad Hardware Maintenance Diskette version 1.71 or later
Note: A Business Partner ID and password is required to download the file from the following Web site: http://www.ibm.com/pc/partner/spm
Sorry, I don't have what it takes to help you there.
From IBM's site: http://www-307.ibm.com/pc/support/site. ... MIGR-44144
ThinkPad Hardware Maintenance Diskette version 1.71 or later
Note: A Business Partner ID and password is required to download the file from the following Web site: http://www.ibm.com/pc/partner/spm
Sorry, I don't have what it takes to help you there.
DKB
GomJabbar: Don't be. You provided me with the details i needed and google did the rest:
http://www.51nb.com/forum/viewthread.php?tid=107134
At the second post theres a link for maint169.exe and that I have downloaded. Tomorrow I will try it out to see if it works
Thanks for showing me in which direction i needed to go
/Christian
http://www.51nb.com/forum/viewthread.php?tid=107134
At the second post theres a link for maint169.exe and that I have downloaded. Tomorrow I will try it out to see if it works
Thanks for showing me in which direction i needed to go
/Christian
Nice sleuthing, Christian! Please let me know if this works - I had my system board replaced and have the exact same problem (IBM update apps don't work because machine type and SN fields are blank).Christian wrote:GomJabbar: Don't be. You provided me with the details i needed and google did the rest:
http://www.51nb.com/forum/viewthread.php?tid=107134
At the second post theres a link for maint169.exe and that I have downloaded. Tomorrow I will try it out to see if it works
Thanks for showing me in which direction i needed to go
/Christian
IBM ThinkPad T42p (2373-7XU): 1.8GHz/1024MB, 15" UXGA, DVD-RW, 80GB, 2200b/g.
T42 (2374-3VU): 1.7GHz/512MB, 14.1"SXGA+, DVD-RW, 80GB, 2200b/g.
T42 (2374-3VU): 1.7GHz/512MB, 14.1"SXGA+, DVD-RW, 80GB, 2200b/g.
It works. Just tried it a couple of days ago. The only matter is, that you have to type S1 in front of the type/serial number.
In the commandline you need to type
S1<type><serial>
example:
S1237372A99123456
/Christian
In the commandline you need to type
S1<type><serial>
example:
S1237372A99123456
/Christian
Thinkpad W510, i7 720QM, 16GB RAM, 256GB SSD+1TB HDD, 9-cell battery, homepage
I think you need to find a computer with a floppy drive. Create the disk on that one, then burn a bootable CD with the floppydisk image. Ahead Nero can do this.
/Christian
/Christian
Thinkpad W510, i7 720QM, 16GB RAM, 256GB SSD+1TB HDD, 9-cell battery, homepage
I read in the following thread of someone who claimed they upgraded the BIOS on a 600E using a CD (this normally takes a floppy).
http://forum.thinkpads.com/viewtopic.php?t=17326
http://forum.thinkpads.com/viewtopic.php?t=17326
DKB
sorry but you need to a diskette for the HMD to workChristian wrote:I think you need to find a computer with a floppy drive. Create the disk on that one, then burn a bootable CD with the floppydisk image. Ahead Nero can do this.
/Christian
create the diskette and use an USB floppy on your thinkpad
IBM ThinkPad T42 CTU # Pentium M 1.8 Ghz Dothan # Mobility 9600 64 MB @375/240 # Hynix 1024 MB PC2700 RAM #
Fujitsu 80 GB 5400 RPM # LG CDRW/DVD Combo Drive # Intel Wireless b/g mPCI # TFT 14.1 XGA Display # WinXP Pro SP2 Catalyst 7.7
Fujitsu 80 GB 5400 RPM # LG CDRW/DVD Combo Drive # Intel Wireless b/g mPCI # TFT 14.1 XGA Display # WinXP Pro SP2 Catalyst 7.7
Thinkpad Hardware Maintenance Diskette version 1.74
If anyone needs the diskette image creator for the Thinkpad Hardware Maintenance Diskette version 1.74, e-mail me. At the risk of illegally distributing it (and please stop me if I am!), let me know if you'd like to host it for download.
If you've changed the system board on your laptop, this is the utility you need to set the model type, sub-model type (mmmm-sss), and system serial number. Also sets the system UUID, as well as other initialization utilities like hard drive formatting.
Filename: i7tm22us.exe
Dimarc67
If you've changed the system board on your laptop, this is the utility you need to set the model type, sub-model type (mmmm-sss), and system serial number. Also sets the system UUID, as well as other initialization utilities like hard drive formatting.
Filename: i7tm22us.exe
Dimarc67
Most of the links mentioned in previous posts seem to be outdated now. However, I had success downloading the Thinkpad Hardware Maintenance Diskette version 1.74 from:
ftp://ftp.software.ibm.com/pc/pccbbs/bp ... tm22us.exe
Regards,
Thomas.
ftp://ftp.software.ibm.com/pc/pccbbs/bp ... tm22us.exe
Regards,
Thomas.
Sorry, I just noticed that my previous post had a typo in the file name.
Please try
ftp://ftp.software.ibm.com/pc/pccbbs/bp ... tm22us.exe
I generated the diskette from that file last evening and it worked.
Please try
ftp://ftp.software.ibm.com/pc/pccbbs/bp ... tm22us.exe
I generated the diskette from that file last evening and it worked.
Bless you microtom, you are so kind.
microtom wrote:Sorry, I just noticed that my previous post had a typo in the file name.
Please try
ftp://ftp.software.ibm.com/pc/pccbbs/bp ... tm22us.exe
I generated the diskette from that file last evening and it worked.
T61p (6459CTO)|T9500|15.4" WUXGA-4GB|200GB FDE|256MB nVidia FX570M|Atheros|Cingular WWAN|openSuSE 11.0
T42p (2373GVU)|PentiumM 1.8GHz|2GB|100GB|ATI FireGL T2|Atheros|openSuSE 10.3
WaterField Designs Cargo + Sleeve
-
- Admin Emeritus
- Posts: 23825
- Joined: Mon Sep 18, 2006 5:17 am
- Location: Loch Garman, Éire
The above info is not correct, it should be 1S instead of S1.Christian wrote:It works. Just tried it a couple of days ago. The only matter is, that you have to type S1 in front of the type/serial number.
In the commandline you need to type
S1<type><serial>
example:
S1237372A99123456
/Christian
e.g. 1S2373A991234567 (and not ...123456 as above).
In my T30 (and others I guess), the way to do it:
1) Go into the BIOS with F1 and set the boot-sequence to FLOPPY first. Insert floppydrive + HMD-floppy.
2) Reboot, then press ESC as soon as the IBM logo appears. The EEPROM write-protection is now inactive.
3) Once in the program, check Option 2) first to READ what's in there.
You are interested in the 20- option for Type/Serial.
If empty, select Option 1) - Add new S/N, and again select the 20 - field.
If old/wrong info is in this 20 - field, use Option 9) first to delete it, then use Option 1) to add the new Type/SN.
As shown above, first insert 1S, then Type 2373 then Model A99 and finally the 7-char. Serial Number 99KWFW3 and press Enter (no spaces anywhere!).
Exit the program, reboot into BIOS and set the Boot-Sequence the way you had/want it.
HTH
Lovely day for a Guinness! (The Real Black Stuff)
-
- Freshman Member
- Posts: 52
- Joined: Mon Feb 05, 2007 6:20 pm
- Location: Chicago, IL, USA
- Contact:
The link seems to have changed to ftp://ftp.software.ibm.com/pc/pccbbs/mo ... tm23us.exe.
Thanks for the updated link! I need to do this again since my model/serial numbers are all messed up for whatever reason. I need it to appear to be a 2373-9XU still even though I upgraded the processor to the 2.0 and upgraded the RAM to 2GB.
--Chris
IBM ThinkPad T42 "2373-9XU" now with 2.0GHz, 2GB RAM, 9600 64M, 14.1", CDRW/DVD, IBM A/B/G, BT, fingerprint reader.
Lenovo ThinkPad X201s 5129-CTO 2.13GHz Core-i7, 4GB RAM, WSXGA LED, 128GB SSD, Centrino Ultimate 6300, etc. Shipping 11 March
IBM ThinkPad T42 "2373-9XU" now with 2.0GHz, 2GB RAM, 9600 64M, 14.1", CDRW/DVD, IBM A/B/G, BT, fingerprint reader.
Lenovo ThinkPad X201s 5129-CTO 2.13GHz Core-i7, 4GB RAM, WSXGA LED, 128GB SSD, Centrino Ultimate 6300, etc. Shipping 11 March
It's HMD (Hardware Maintenance Disk), not HDM. I used Nero on my desktop to make a bootable CD from the floppy. It reads the EEPROM on my 600e but that's all I've tried to do using the bootable CD. Everything should work as long as none of the executables try to write back to the CD.Caryntjen wrote:how do I run the program If I don't have a floppydrive and I really don't know what a HDM floppy is...
ThinkPad T60 1951-43U (with many upgrades)
-
- Freshman Member
- Posts: 109
- Joined: Sat Feb 03, 2007 9:39 pm
- Location: Raleigh, NC
To all those going to attempt to do this via a bootable CD:
It will not work. See this thread.
You must be booting from a floppy to unlock the eeprom.
It will not work. See this thread.
You must be booting from a floppy to unlock the eeprom.
T61 LG WSXGA+, 140m, CD2 2.0, Stock 7200.1, 2GB, Thinkpad A/B/G, UWB, DVD-RW, ALPS
-
- Junior Member
- Posts: 488
- Joined: Mon Oct 31, 2005 4:18 am
Hi guys, I just bought a floppy drive and some disks. However I don't know how to use the file i7tm23us.exe. I thought it'd install some stuff in a blank floppy disk but I was wrong. I can't open it either in Vista or 2000. Should I copy the file to the HMD floppy disk and run it in DOS or something like that?
I appreciate your ideas!
I appreciate your ideas!
You can't 'just copy to a floppy and run it'. It does open in XP SP1. It prompts you to read 15 pages of an agreement then prompts for a diskette in drive A. It then creates a bootable diskette and apparently this FLOPPY is needed to make eeprom changes.ulrich.von.lich wrote: I can't open it either in Vista or 2000. Should I copy the file to the HMD floppy disk and run it in DOS or something like that?
Although our operating systems are different, can't help but wonder if the file you have is corrupted (it SHOULD open)!
Try D/L'ing it again
IBM Thinkpad T41 Home | X31 Travel | X60 fun
2GHz Dothan (X60 C2D, X31 1.7 Banias), 2GB RAM, 320GB HDD, DVD Multi-Burner, IBM 11b/g, Bluetooth II, Docks
multi-boot (98SE, W2K, XP PRO, Win7, Linux Mint 10)
2GHz Dothan (X60 C2D, X31 1.7 Banias), 2GB RAM, 320GB HDD, DVD Multi-Burner, IBM 11b/g, Bluetooth II, Docks
multi-boot (98SE, W2K, XP PRO, Win7, Linux Mint 10)
-
- Junior Member
- Posts: 488
- Joined: Mon Oct 31, 2005 4:18 am
Thanks sojourner!! I tried the same file in Windows XP SP2 (via Virtual PC) and it worked!!!! However I can confirm that it does not work under Windows VIsta or 2000 environment.sojourner wrote:You can't 'just copy to a floppy and run it'. It does open in XP SP1. It prompts you to read 15 pages of an agreement then prompts for a diskette in drive A. It then creates a bootable diskette and apparently this FLOPPY is needed to make eeprom changes.ulrich.von.lich wrote: I can't open it either in Vista or 2000. Should I copy the file to the HMD floppy disk and run it in DOS or something like that?
Although our operating systems are different, can't help but wonder if the file you have is corrupted (it SHOULD open)!
Try D/L'ing it again
Now, is it enough or do I still need the HMD disk?? Which one should I insert at startup? I checked with Nero but didn't find the option. Any idea?
Wow, I am really surprised that file did not open in W2K nor Vista! Interesting ...Thanks sojourner!! I tried the same file in Windows XP SP2 (via Virtual PC) and it worked!!!! However I can confirm that it does not work under Windows VIsta or 2000 environment.
Not sure I understand the questions. I've created the floppy (because that's what the program wants, and comments from those who've used the program say they run a FLOPPY), so I will use a floppy (external USB) and think you need to create it as well (i7tm23us.exe will prompt you to make it). I need to change the TYPE on one of the TP's here, have not done that yet and it could be a few days before time will allow.Now, is it enough or do I still need the HMD disk?? Which one should I insert at startup? I checked with Nero but didn't find the option. Any idea?
From what I understand, you need to:
1. open i7tm23us.exe
2. read 15 pages of IBM agreement
3. have a good blank 1.44mb floppy ready in drive A
4. make the floppy
5. boot your lappie from the floppy
6. pray all goes well
Hope you will post back; keep us informed with how you make out!
IBM Thinkpad T41 Home | X31 Travel | X60 fun
2GHz Dothan (X60 C2D, X31 1.7 Banias), 2GB RAM, 320GB HDD, DVD Multi-Burner, IBM 11b/g, Bluetooth II, Docks
multi-boot (98SE, W2K, XP PRO, Win7, Linux Mint 10)
2GHz Dothan (X60 C2D, X31 1.7 Banias), 2GB RAM, 320GB HDD, DVD Multi-Burner, IBM 11b/g, Bluetooth II, Docks
multi-boot (98SE, W2K, XP PRO, Win7, Linux Mint 10)
-
- Junior Member
- Posts: 488
- Joined: Mon Oct 31, 2005 4:18 am
I just successfully added the serial number!!
A floppy disk created by i7tm23us.exe, an external floppy drive and RealBlackStuff's walkthrough are all that you'll ever needed!
Just one thing that might be a little confusing:
After selecting option 1, you'll still have to choose the field. Typing 20 for system-unit serial number and 40 for system board serial number.(still a few other fields). I entered the wrong number due to a nasty typo but luckily I was given a chance to erase it.
So after option 1, type 20, then type 1S + machine/model type + serial number (without spaces).
Finally, choose option 2 to verify the information is entered correctly. In my case, I was able to see the field 20 and 40 in the EEPROM. The field 40 is the MB serial number, which seems to be changeable too.
Hope it helps!
A floppy disk created by i7tm23us.exe, an external floppy drive and RealBlackStuff's walkthrough are all that you'll ever needed!
Just one thing that might be a little confusing:
After selecting option 1, you'll still have to choose the field. Typing 20 for system-unit serial number and 40 for system board serial number.(still a few other fields). I entered the wrong number due to a nasty typo but luckily I was given a chance to erase it.
So after option 1, type 20, then type 1S + machine/model type + serial number (without spaces).
Finally, choose option 2 to verify the information is entered correctly. In my case, I was able to see the field 20 and 40 in the EEPROM. The field 40 is the MB serial number, which seems to be changeable too.
Hope it helps!
It appears that the links to the Maintenance Disk file are no longer valid. Could some kind soul email the file to me (if it isn't too large) at scmidgley@gmail.com?
Steve,smidgley wrote:It appears that the links to the Maintenance Disk file are no longer valid. Could some kind soul email the file to me (if it isn't too large) at scmidgley@gmail.com?
According to the thread T43P - Incorrect serial number in bios (I assume) (see the post by superboss of Sun Sep 02, 2007 4:19 am), you may download the "IBM Thinkpad Hardware Maintenance Diskette" (ver. 1.75, I believe) from here --> ftp://ftp.software.ibm.com/pc/pccbbs/mo ... tm23us.exe - and I just did that, with no problems. Have a try - if having troubles let me know, and I will send you a zipped copy via e-mail.
Best regards,
Johan
IBM T42p's (2373-Q1U & -Q2U): 2.1 GHz, 15" UXGA FlexView, 2 GB RAM, 128 MB FireGL T2, 128 GB 1.8" SATA SSD, IBM a/b/g, BT, Win 7 Ultimate
IBM T42 (2373-N1G): 1.8 GHz, 15" SXGA+ FlexView, 2 GB RAM, 64 MB Radeon 9600, 64 GB 1.8" SATA SSD, IBM a/b/g, BT, Win 7 Ultimate
IBM T42 (2373-N1G): 1.8 GHz, 15" SXGA+ FlexView, 2 GB RAM, 64 MB Radeon 9600, 64 GB 1.8" SATA SSD, IBM a/b/g, BT, Win 7 Ultimate
-
- Similar Topics
- Replies
- Views
- Last post
-
-
380ED display panel replacement - Type 1 and Type 2 panels?
by KylesDigitalLab » Thu Oct 26, 2023 11:26 pm » in ThinkPad Legacy Hardware - 0 Replies
- 2358 Views
-
Last post by KylesDigitalLab
Thu Oct 26, 2023 11:26 pm
-
-
-
Bios messages being displayed at startup - "Machine Type is invalid" etc.
by axiomcs78 » Thu Jan 11, 2024 10:27 am » in ThinkPad X1 / X1-Carbon / X1-Extreme and later Series - 4 Replies
- 1434 Views
-
Last post by RealBlackStuff
Fri Jan 12, 2024 3:10 am
-
-
-
FS: Thinkpad X31 Type 2672-C2U for parts with dock
by twiceferrel » Fri Jan 12, 2024 3:32 am » in Marketplace - Forum Members only - 2 Replies
- 1324 Views
-
Last post by RedPanda
Wed Jan 24, 2024 12:19 pm
-
-
-
Obscure 1996 'Type 7344' IBM Tablet
by solidpro » Tue Jan 30, 2024 12:16 pm » in ThinkPad Legacy Hardware - 3 Replies
- 761 Views
-
Last post by solidpro
Sat Feb 03, 2024 11:24 am
-
Who is online
Users browsing this forum: Bing [Bot] and 27 guests