Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
How to Fresh Install Win XP (Step-by-Step Guide)
How to Fresh Install Win XP (Step-by-Step Guide)
When I first got my T42 3VU and wanted to install a clean copy of Windows XP, I looked every where on the net to find a detailed guide that walks you through all the necessary steps to accomplish this task. Unfortunately, I could not find such a guide.
So, I decided to write this guide myself and make it available to everyone. This step-by-step guide shows you how can you create a bootable CD, format and fresh install Windows XP Pro, and finally install all the necessary drivers for your ThinkPad.
The guide is avaialble on my web site here:
http://www.4saad.com/WhatsNew/Fresh_XP_ ... /index.htm
Senior Admin edit:
since the above link is now dead, another forum user is hosting the document, here:
http://www.slideshare.net/robert99
So, I decided to write this guide myself and make it available to everyone. This step-by-step guide shows you how can you create a bootable CD, format and fresh install Windows XP Pro, and finally install all the necessary drivers for your ThinkPad.
The guide is avaialble on my web site here:
http://www.4saad.com/WhatsNew/Fresh_XP_ ... /index.htm
Senior Admin edit:
since the above link is now dead, another forum user is hosting the document, here:
http://www.slideshare.net/robert99
-
- Sophomore Member
- Posts: 132
- Joined: Thu May 27, 2004 12:54 am
- Location: USA
-
- Senior Member
- Posts: 936
- Joined: Wed Jul 07, 2004 11:02 pm
- Location: Knoxville, TN
-
- Senior Member
- Posts: 936
- Joined: Wed Jul 07, 2004 11:02 pm
- Location: Knoxville, TN
Went ahead and tried subbing SP2 file for SP1 in the process above, but Windows wouldn't intergrate it. So, I was wondering if I could go ahead and use the process for SP1 exactly like it says to do it above (on an SP2 machine), or am I asking for trouble here? Wondering if the I386 folder contents have changed after upgrading to SP2 on my computer? If it would work then I can always upgrade to SP2 again after reinstalling SP1 version of WinXP with this process. Does anyone know the answer to these questions. Hate to go on without them.
No. That is why I mentioned in step 2 that I will write a separate guide for SP2 because the procedure is somewhat different.cakos wrote:I assume Extracting and Integrating the SP2 is done by replacing the sp1 package by the sp2 one....
I'm not sure if I understand this right! You said SP2 machine, do you mean that your machine shipped from IBM with SP2 preinstalled? if that the case, then your i386 folder would not work as I described in my guide for sure.MadeInJapan wrote:Went ahead and tried subbing SP2 file for SP1 in the process above, but Windows wouldn't intergrate it. So, I was wondering if I could go ahead and use the process for SP1 exactly like it says to do it above (on an SP2 machine), or am I asking for trouble here? Wondering if the I386 folder contents have changed after upgrading to SP2 on my computer? If it would work then I can always upgrade to SP2 again after reinstalling SP1 version of WinXP with this process. Does anyone know the answer to these questions. Hate to go on without them.
On the other hand, if you mean that you had a SP1 machine and you did the SP2 upgrade yourself, then I do not see a reason why your i386 would change as SP2 installation would affect only the system files. So the guide should work in your case for a clean install for WinXP with SP1.
A good way to check if your i386 folder has changed after installing SP2 is to search for the most recent modified file in i386. If that date is after when you first got your loptop, then some changes have been done which I don't think so.
For everyone wants to do a fresh install with SP2. Just follow my guide and after the last step (updating all the drivers) install SP2.
-
- Senior Member
- Posts: 936
- Joined: Wed Jul 07, 2004 11:02 pm
- Location: Knoxville, TN
I put my SP2exe file in a folder in C:\ and named the folder SP2.
then I used this in my run line instead of what's stated above and finally had success with the integration!
C:\SP2\WindowsXP-KB835935-SP2-ENU.exe -s:C:\bcd\cds\wxppro\files\
After my unsuccessful attempt earlier, I deleted the I386 folder in the cds folder I had created, rebooted the computer and copied the I386 again and did the above. I think that's what made the difference.
then I used this in my run line instead of what's stated above and finally had success with the integration!
C:\SP2\WindowsXP-KB835935-SP2-ENU.exe -s:C:\bcd\cds\wxppro\files\
After my unsuccessful attempt earlier, I deleted the I386 folder in the cds folder I had created, rebooted the computer and copied the I386 again and did the above. I think that's what made the difference.
Thanks, that is a superb guide!!
Flushed my hidden partition and IBM stuff long time ago and made a clean XP install the hard way. But I could not get the IBM key to work with a corporate XP ver. thus I am using a company key but I would like have the IBM key. Seems to be possible now!
The only thing is; I sure hope the i386 folder will in my ghost backup that made of the original system. I tried to get the cd’s from IBM but they would only give me the Danish discs, though my TP came with an English XP – strange.
Glad to know that I am not the only one who feels more comfortable with a clean install; and thinks the HPA was a little waste of space.
Flushed my hidden partition and IBM stuff long time ago and made a clean XP install the hard way. But I could not get the IBM key to work with a corporate XP ver. thus I am using a company key but I would like have the IBM key. Seems to be possible now!
The only thing is; I sure hope the i386 folder will in my ghost backup that made of the original system. I tried to get the cd’s from IBM but they would only give me the Danish discs, though my TP came with an English XP – strange.
Glad to know that I am not the only one who feels more comfortable with a clean install; and thinks the HPA was a little waste of space.
Hello:
I've found this software to be one of the most useful tools available and is worthy of mention for those of us too lazy to do all the manual way:
http://www.neowin.net/forum/index.php?s ... 88337&st=0
I've found this software to be one of the most useful tools available and is worthy of mention for those of us too lazy to do all the manual way:
http://www.neowin.net/forum/index.php?s ... 88337&st=0
I have come across this tool when I was writing the guide. It's very easy to use, but unfortunately, it only works if you have the original WinXP CD (OEM/retail) or the network installation files. Neither of these options is available for us ThinkPad users because we are stuck with the i386 folder and the recovery CDs.rocky01 wrote:Hello:
I've found this software to be one of the most useful tools available and is worthy of mention for those of us too lazy to do all the manual way:
http://www.neowin.net/forum/index.php?s ... 88337&st=0
-
- Senior Member
- Posts: 936
- Joined: Wed Jul 07, 2004 11:02 pm
- Location: Knoxville, TN
Wow, Rocky! What an App! I'm going to use this to Slipstream SP4 on my T22's at work which have Japanese Windows 2000 on them.
If you decide to use version 1.00.31B (the latest version) and read all 31 pages of the forum. There are a lot of bugs worked out and you'll need to know all the ins and outs of that.
This program will work for any language Windows 2K and XP and all service packs to date and is very small and very simple! Go check it out.
If you decide to use version 1.00.31B (the latest version) and read all 31 pages of the forum. There are a lot of bugs worked out and you'll need to know all the ins and outs of that.
This program will work for any language Windows 2K and XP and all service packs to date and is very small and very simple! Go check it out.
I juust got to step 13, right after the winxp install and for some reason I cannot connect to the net. I tried to set up a netowrk conenction but it seems like its not being created. I have highspeed cable connection that doesnt need password. Cant go any further since I have to download most everything now.
EDIT: Got it...i had to install drivers for the ethernet controller. The drivers were on the backup dvd created.
EDIT: Got it...i had to install drivers for the ethernet controller. The drivers were on the backup dvd created.
-
- Senior Member
- Posts: 936
- Joined: Wed Jul 07, 2004 11:02 pm
- Location: Knoxville, TN
Nearly...that process works too but AutoStreamer simplifies everything. I've made intergrated, bootable installation discs now for English and Japanese versions of Windows XP and Windows 2000 with it. If anyone is interested, just go to the link in this thread (small download size) and download the latest version of AutoStreamer. You don't have to read all the 30 some odd pages now to do it (like I said you should do earlier in the thread). It is extremely user friendly and self explanatory.
Problems
I have gone through each step of this process, however when i get to the part where it is suppoed to burn the contents to the cd, it doesn't. The cd is empty. Is there anything I am doing wrong?
Thanks
EDITED: IGNORE THIS POST, i downloaded an old .dll file.
Thanks
EDITED: IGNORE THIS POST, i downloaded an old .dll file.
-
- Senior Member
- Posts: 936
- Joined: Wed Jul 07, 2004 11:02 pm
- Location: Knoxville, TN
What program are you using to burn the CD? Most seem to use Nero. I prefer using RecordNow. It's an ISO file so you could even use DVD Decryptor if you want (usually only burns DVD's but if it's ISO, it'll work). You can even mount the ISO image as if it's already a disc and burn it as if it's a CD to CD copy if you want (programs that come to mind are Daemon Tools and Nero's Image Drive).
-
- Senior Member
- Posts: 936
- Joined: Wed Jul 07, 2004 11:02 pm
- Location: Knoxville, TN
heavybyte...it's whatever you chose to name it during the process. I named mine WXPSP4 (For Windows XP with SP 4). Whatever you named it, it should have an ISO extension.
If you're not sure where you save it (usually right under C:), then go into Search and do a search for *.*iso This will search out all ISO files.
Good Luck!
If you're not sure where you save it (usually right under C:), then go into Search and do a search for *.*iso This will search out all ISO files.
Good Luck!
-
- Senior Member
- Posts: 936
- Joined: Wed Jul 07, 2004 11:02 pm
- Location: Knoxville, TN
The "official" recovery CD's from IBM don't have the I386 folders visible...they are encrypted in their own type of files. If you have your computer up and running and are using either Windows XP or Windows 2000, use the I386 folder from within Windows. It will be under C:\ in XP and in C:\WINNT\ in Win2000, but if you're like me, you've cleaned out the I386 folder in Win2000 (my desktop) and nothing there to copy. In this case you can use a Win2000 install disk.
In the case of the IBMTOOLS folder...um...NO, these programs won't copy into your slipstreamed installation disk. You'll have to back the programs you want some other way. If all will copy onto a disc then copy the whole folder, if not then pick and choose or if you have a DVD burner on your Thinkpad, copy onto DVD....I know the folder will fit on that!
Good luck
In the case of the IBMTOOLS folder...um...NO, these programs won't copy into your slipstreamed installation disk. You'll have to back the programs you want some other way. If all will copy onto a disc then copy the whole folder, if not then pick and choose or if you have a DVD burner on your Thinkpad, copy onto DVD....I know the folder will fit on that!
Good luck
Step 10 http://www.4saad.com/WhatsNew/Fresh_XP_ ... Step10.htm says that the HPA will be visible in 'My Computer' once it is disabled in the BIOS, but this is not working for me. Please see my thread here
http://forum.thinkpads.com/viewtopic.php?p=27167
any suggestions or ideas?
http://forum.thinkpads.com/viewtopic.php?p=27167
any suggestions or ideas?
The light version of this, wouldn't that be to just skip to step 10 where the IBM partition is disabled, and just erease it?
Or could it be even more easy: when I check the drive with PartitionMagic I see the hidden partition, and I'm playing with the idea to just erase it and incorporate it with the bigger partition. Wouldn't that be possible?
It won't be a clean install, but on the other hand, it will be much easier to do, and without any (?) risks.
And to be honest, will I notice a difference when I do a clean install of XP, or is it just the knowledge that I've done it that I will get?
Or could it be even more easy: when I check the drive with PartitionMagic I see the hidden partition, and I'm playing with the idea to just erase it and incorporate it with the bigger partition. Wouldn't that be possible?
It won't be a clean install, but on the other hand, it will be much easier to do, and without any (?) risks.
And to be honest, will I notice a difference when I do a clean install of XP, or is it just the knowledge that I've done it that I will get?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Thinkpad X220 Tablet Step-By-Step Windows 11 with all Fn key
by nomad1977 » Sat Dec 23, 2023 5:32 pm » in ThinkPad X200/X201/X220 and X300/X301 Series - 3 Replies
- 7290 Views
-
Last post by dr_st
Sun Dec 24, 2023 5:01 pm
-
-
-
P1 Gen 1 and P1 Gen 3 problems, would fresh install of Windows 10 resolve?
by Muse » Thu Apr 25, 2024 3:19 pm » in ThinkPad P1/P40/P50/P70 and later Series - 3 Replies
- 645 Views
-
Last post by Muse
Tue Apr 30, 2024 12:47 pm
-
-
-
How new my laptop really needs to be? A guide to modern computing
by mikemex » Wed Jan 31, 2024 2:57 pm » in Off-Topic Stuff - 9 Replies
- 3909 Views
-
Last post by mikemex
Sun Feb 11, 2024 3:14 pm
-
-
-
Win 10 update broke my backlight/Fn Key (X240)
by DavidGould » Sat Dec 09, 2023 11:28 am » in ThinkPad X230-X280 / X390 Series - 2 Replies
- 2275 Views
-
Last post by DavidGould
Tue Dec 12, 2023 4:17 pm
-
Who is online
Users browsing this forum: No registered users and 4 guests